Hp StorageWorks 1510i Modular Smart Array Instrukcja Użytkownika Pobierz pdf (Strona 78)

set auto_path_change

Description for dual-cont

roller conﬁgurations only, turns on or off automatic, MSA-based

I/O load balan

cing. If automatic path changes are enabled, the controller

ﬁrmware may s

ubsequently and automatically change controller paths for a

target, base

donI/Oload.

Syntax set auto_path_change enable|disable [prp=<#>] [mnr=<#>]

[twp=<#>] [

twl=<#>]

Operands

enable|disable

Enables or d

isables automatic path changes.

prp=<#>

The minimum

percent of proxied requests to trigger a path change, where

the percen

tage <#>isfrom51to100.

mnr=<#>

The minimum

number of requests issued to the LUN to trigger a path change.

twp=<#>

The minimum

time to wait after the system is powered on or restarted to

make any path changes, where <#>isfrom0to255minutes.

twl=<#>

The minimum time to wait for subsesquent path changes to the same LUN,

where <#> is from 0 to 255 minutes.

Example

CLI> set au

to_path_change mnr=100

Implicit (

automatic load-based) LUN ownership changes are currently ENABLED.

Implicit L

UN ownership change preferences are as follows:

Minimum % o

f proxied requests to trigger implicit path change..: 75%

Minimum nu

mber of requests to LUN before path change enabled...: 128

Minimum ti

me to wait before changing ownership after power-up..: 30 minutes

Minimum ti

me between ownership changes for LUN.................: 30 minutes

Komentarze do niniejszej Instrukcji

Brak uwag

Hp StorageWorks 1510i Modular Smart Array Instrukcja Użytkownika Strona 78

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Przechowywanie Hp StorageWorks 1510i Modular Smart Array