HP DL580 Biała Księga

HP ProLiant Storage Server SAN Connection and Management

Expand Storage in a SAN environment Expansion is the process of adding physical disks to an array that has already been configured. The logical driv

Note: The Expand Array task is listed only if there is an unassigned physical drive on the controller. The unassigned drive must also have a capa

6. Extend the volume (extend [size=n]) size is optional. 7. Extend a LUN for EVA storage arrays (clustered environment) To extend a LUN on an EVA

Connecting to a SAN The instructions below are an aid to customers connecting to their Storage Area Network (SAN). Check the HP web site at http://www

Section 1: MSA – Modular SAN Array STEP 1: Verify that the FC HBA driver version, firmware, and Boot BIOS are installed. FCA2101 FCA2214 FCA2214

STEP 4: Connect the appropriate fiber cables to the HBA card(s). STEP 5: Install SecurePath Manager (optional). If you use SecurePath, and want to i

STEP 4: Install the multipath software (SecurePath or HP MPIO DSM). HP SecurePath version: v4.0C SP1.1 (EVA3000/5000 only) HP MPIO version: Basic

The above table shows the latest driver/firmware/Boot Bios for the supported FC HBAs. Check the HP web site http://www.hp.com for updates. Note: W

Section 4: VA – Virtual Array STEP 1: Verify that the FC HBA driver version, firmware, and Boot BIOS are installed. KGPSA-CB 176479-B21 FCA2101 F

Section 5: MA – Modular Array (HSG-80) STEP 1: Verify that the FC HBA driver version, firmware, and Boot BIOS are installed. KGPSA-CB 176479-B21 F

• Extended Configuration: o Select Extended Configuration during installation, if you have an Extended Configuration for your back-end storage array