HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) Instrukcja Użytkownika Pobierz pdf (Strona 73)

4. With the battery bay toward you, slide the service door release latch to the left (3), and if you choose to,

insert and tighten the optional screw (4) to hold the service door in place. Slide the release latch to the

right to lock the service door (5).

NOTE: If you do not want to use the optional screw, it is stored inside the service door.

5. Insert the battery (see Inserting a battery on page 48).

Replacing or upgrading the hard drive

CAUTION: To prevent information loss or an unresponsive system:

Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard

drive while the computer is on, in the Sleep state, or in Hibernation.

If you are not sure whether the computer is off, turn the computer on by pressing the power button. Then

shut down the computer through the operating system.

Removing the hard drive

To remove a hard drive:

1. Save your work and shut down the computer.

2. Disconnect AC power and external devices connected to the computer.

3. Turn the computer upside down on a flat surface.

4. Remove the battery (see

Removing a battery on page 48).

5. Remove the service door (see

Removing the service door on page 62).

ENWW Using hard drives 63

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 119 120

Brak uwag

HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) Instrukcja Użytkownika Strona 73