Hp Smart Array P830 Controller Instrukcja Użytkownika Strona 12

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 45
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 11
Installation and configuration 12
Installation and configuration
Procedures for controllers in a server
To install a stand-up controller in a server, choose one of the following procedures:
Installing a stand-up controller in an unconfigured server (on page 12)
Installing a stand-up controller in a previously configured server (on page 12)
Installing a stand-up controller in an unconfigured server
IMPORTANT: Do not power up the server until the hardware configuration is satisfactory, as
described in the procedure given in this section.
To install the controller in an unconfigured server:
1. Install the controller hardware ("Installing the controller board" on page 13). For server-specific
procedures, see the server user guide.
2. If the controller supports external storage, connect external storage devices to the controller.
3. Install physical drives, as needed.
4. Power up the external storage devices.
5. Power up the server.
6. Verify the server firmware is the latest revision. If necessary, update the server firmware ("Updating
firmware" on page 19).
7. Verify the controller firmware is the latest revision. If necessary, update the controller firmware
("Updating firmware" on page 19).
8. Verify the drive firmware is the latest revision. If necessary, update the drive firmware ("Updating
firmware" on page 19).
9. Verify the iLO firmware is the latest revision. If necessary, update the iLO firmware ("Updating
firmware" on page 19).
10. If expanders are present, verify the expander firmware is the latest revision. If necessary, update the
expander firmware ("Updating firmware" on page 19).
11. Install the operating system and device drivers ("Installing device drivers" on page 19). Instructions are
provided with the CD that is supplied in the controller kit.
12. (Optional) Create additional logical drives ("Configuring an array" on page 18).
The server is now ready for use.
Installing a stand-up controller in a previously configured server
1. Back up data on the system.
2. Close all applications.
Przeglądanie stron 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 44 45

Komentarze do niniejszej Instrukcji

Brak uwag

Checkline TSA750 manuals

Owner’s manuals and user’s guides for Sensors Checkline TSA750.
We providing 1 pdf manuals Checkline TSA750 for download free by document types: User Manual






More products and manuals for Sensors Checkline

Models Document Type
TSFM500 User Manual   Checkline TSFM500 User Manual, 6 pages
ESM301 User Manual   Checkline ESM301 User Manual, 27 pages
MX2 User Manual   Checkline MX2 User Manual, 8 pages
FGS-100PV User Manual   Checkline FGS-100PV User Manual, 20 pages
FGS-220VC User Manual   Checkline FGS-220VC User Manual, 33 pages
MX-500 User Manual   Checkline MX-500 User Manual, 4 pages
ESMH User Manual   Checkline ESMH User Manual, 6 pages
FGS-100PX User Manual   Checkline FGS-100PX User Manual, 20 pages
ZP User Manual   Checkline ZP User Manual, 10 pages
R52 User Manual   Checkline R52 User Manual, 2 pages
AWS-4050 User Manual   Checkline AWS-4050 User Manual, 14 pages
TI-25LT User Manual   Checkline TI-25LT User Manual, 9 pages
TI-25S User Manual   Checkline TI-25S User Manual, 11 pages
TI-25M User Manual   Checkline TI-25M User Manual, 13 pages
TI-25DL User Manual   Checkline TI-25DL User Manual, 19 pages
TI-25M-MMX User Manual   Checkline TI-25M-MMX User Manual [en] , 15 pages
TI-25DL-MMX User Manual   Checkline TI-25DL-MMX User Manual, 17 pages
TI-007 User Manual   Checkline TI-007 User Manual, 9 pages
TI-007DL User Manual   Checkline TI-007DL User Manual, 11 pages
TI-CMX User Manual   Checkline TI-CMX User Manual, 29 pages