Hp ProLiant BL465c Gen8 Server Blade Instrukcja Użytkownika Pobierz pdf (Strona 16)

Operations 16

Connect the drive cable connectors to the SAS controller.

3. Install the access panel (on page 14).

4. Install the server blade ("Installing a server blade" on page 25).

Remove the front panel/drive cage assembly

1. Power down the server blade (on page 12).

2. Remove the server blade (on page 13).

3. Remove the access panel (on page 14).

CAUTION: Always disconnect the drive cables from the SAS controller before removing the

DIMM baffle. Failure to do so may result in damage to the SAS controller.

4. Disconnect the drive cables from the SAS controller and remove the DIMM baffle ("Remove the DIMM

baffle" on page 14).

5. Remove all hard drives ("Drive option" on page 27).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 88 89

User Guide 1
Contents 3
Contents 4 4
Contents 5 5
Component identification 6
Front panel LEDs and buttons 7
Drive LED definitions 8
System board components 8
System maintenance switch 9
DIMM slot locations 10
Tool location 11
HP c-Class Blade SUV Cable 11
Operations 12
Remove the server blade 13
Remove the access panel 14
Install the access panel 14
Remove the DIMM baffle 14
Install the DIMM baffle 15
Operations 17 17
Remove the SAS controller 18
Install the SAS controller 19
Remove all drives 20
Remove drive 2 21
Overview 22
Connecting to the network 24
Installing a server blade 25
Completing the configuration 26
Introduction 27
Drive option 27
Prepare the drive 28
6. Install the drive 29
Processor option 30
Memory options 34
HP SmartMemory 35
DIMM identification 37
Memory configurations 37
Installing DIMMs 39
Mezzanine card option 40
Capacitor pack option 42
Cabling 48
Drive cabling 49
USB devices 49
USB mouse 51
Item Description 51
Server mode 52
Server QuickSpecs 52
HP iLO Management Engine 52
Active Health System 53
Intelligent Provisioning 54
HP Insight Diagnostics 55
Erase Utility 55
Scripting Toolkit 56
HP Service Pack for ProLiant 57
HP ROM-Based Setup Utility 57
Using RBSU 58
Auto-configuration process 58
Boot options 59
Configuring AMP modes 59
Utilities and features 60
ROMPaq utility 61
Automatic Server Recovery 61
USB support 61
Keeping the system current 62
Software and firmware 63
Version control 63
ProLiant Servers 63
Troubleshooting 64
Battery replacement 65
FCC rating label 66
Modifications 67
• EMC Directive 2004/108/EC 68
Japanese notice 69
BSMI notice 69
Korean notice 69
Chinese notice 70
Ukraine notice 70
Laser compliance 70
Battery replacement notice 71
Electrostatic discharge 73
Specifications 74
Support and other resources 75
Customer Self Repair 77
Reparo feito pelo cliente 79
Acronyms and abbreviations 83
Documentation feedback 85
Index 86 86
Index 87 87
Index 88 88
Index 89 89

Komentarze do niniejszej Instrukcji

Brak uwag

Hp ProLiant BL465c Gen8 Server Blade Instrukcja Użytkownika Strona 16

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Hp ProLiant BL465c Gen8 Server Blade