Hp 10 Instrukcja Użytkownika Strona 8
- Strona / 54
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Basic installations 8
Basic installations
This chapter covers basic ProLiant deployments using the Solaris media. For more information on
other types of deployments, see “Using this guide.”
Prerequisites
To perform a basic installation of Sun Solaris on HP ProLiant servers, the following prerequisites must
be met:
• HP ProLiant Server—Use the ProLiant server support matrix for Solaris to determine which
releases of Solaris 10 are supported on your ProLiant.
• Sun Solaris 10 Distribution Media—Obtain a copy of the appropriate release of Solaris 10 from
Sun Microsystems. Both CD and DVD media are supported.
• Additional Drivers—Depending on your ProLiant model, one or more of the following additional
drivers that are not found on the Solaris media might be required. These drivers are available
from http://www.hp.com
on the “Software and Drivers” page associated with each ProLiant
model.
○ HP Smart Array controller driver—If you are installing to disks attached to a Smart Array
controller, the Smart Array driver cpqary3 is required during installation. For information
about additional requirements, including the use of a Driver Update diskette or CD, see the
HP Smart Array Controller Driver for Solaris 10 User Guide at
ftp://ftp.compaq.com/pub/softlib2/software1/pubsw-windows/p308167783/v40878/
HP_Smart_Array_Controller_Driver_User_Guide.pdf. The Smart Array driver is listed as “HP
Driver Update (DU) for Solaris (x86) 10” on the “Software and Drivers” page.
○ Broadcom NetXtreme II driver—If you are using network interface card (NIC) models
NC370x, NC371x, NC373x, NC374x, or NC380x, the bnx driver is required. This driver
is applied post-installation.
• CD or DVD drive—A CD-ROM or DVD-ROM drive is required to load the Solaris software. A
Universal Serial Bus (USB) drive or iLO virtual media can be used if an internal drive is not
available.
• HP SmartStart CD—For advanced Smart Array configuration, HP SmartStart is required to set up
the arrays. For basic array setup, the Option ROM Configuration for Arrays (ORCA) utility can
be used instead.
• Firmware updates—HP recommends using the latest system ROM and firmware. System ROM,
Smart Array controller firmware, and iLO firmware updates should be applied when available.
• iLO client—If using iLO to perform the installation, a supported iLO client is required.
• iLO Advanced license—If using iLO to perform the installation, an iLO Advanced license is
required. This license is included with all blades.
The most efficient method to deploy Solaris on ProLiant server blades is through the network. If
network deployment is not available, a USB CD/DVD drive can be connected to the blade or iLO
virtual media can be used.
You can install Sun Solaris software using only virtual media, but it is not recommended. For best
results, verify that the iLO firmware is up-to-date. Connecting media images over HTTP using the iLO
secure shell interface can yield improved performance over the Java applet browser interface.
- Sun Solaris 10 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Introduction 6
- Using this guide 7
- Basic installations 8
- General process flow 10
- Miniroot 11
- Configuration information 11
- Packages 11
- Deploying ProLiant servers 12
- Additional drivers 13
- JumpStart 14
- Rapid Deployment Pack 14
- Flash archives 15
- Deployment resource kit 15
- Deployment planning 16
- Configuration methods 17
- Software delivery methods 17
- Deployment tasks 19
- Preparing the install server 20
- Miniroot preparation 21
- JumpStart preparation 23
- DHCP/PXE preparation 26
- GRUB preparation 30
- Booting Solaris from GRUB 31
- Deployment tasks 32 32
- Optional configuration tasks 34
- Detach the mirror: 37
- Troubleshooting 38
- RAID mode not supported 39
- AMD memory scrubber 40
- SNMP master agent 40
- Shell prompt 43
- Network verification 43
- Common issues 44
- GRUB cannot boot Solaris 45
- Troubleshooting 47 47
- Additional documentation 48
- Glossary 50
Powiązane produkty i podręczniki dla Komputery Hp 10
Komputery Hp DL980 G7 Instrukcja Użytkownika
(134 strony)
(134 strony)
Komputery Hp DL380 G7 Instrukcja Użytkownika
(126 strony)
(126 strony)
Komputery Hp A9834-9001B Instrukcja Użytkownika
(247 strony)
(247 strony)
Komputery Hp ZX6000 Instrukcja Użytkownika
(64 strony)
(64 strony)
Komputery Hp 8000 Instrukcja Użytkownika
(2 strony)
(2 strony)
Komputery Hp 2 Instrukcja Użytkownika
(113 strony)
(113 strony)
Komputery Hp dc7100 Instrukcja Użytkownika
(49 strony)
(49 strony)
Komputery Hp DL560 Instrukcja Użytkownika
(35 strony)
(35 strony)
Komputery Hp DV3500 Instrukcja Użytkownika
(10 strony)
(10 strony)
Komputery Hp RP3440 Instrukcja Użytkownika
(210 strony)
(210 strony)
Komputery Hp dx7300 Instrukcja Użytkownika
(42 strony)
(42 strony)
Komputery Hp DL160 Instrukcja Użytkownika
(50 strony)
(50 strony)
Hoshizaki DCM-500BWH-OS manuels
Manuels d'utilisation et guides de l'utilisateur pour Congélateurs Hoshizaki DCM-500BWH-OS.
Nous fournissons des manuels en pdf 1 Hoshizaki DCM-500BWH-OS à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji