Hp RP7 Retail System Model 7100 Instrukcja Użytkownika Pobierz pdf (Strona 19)

Using the Base

Base LEDs

LEDs on the Base provide information about the Base as well as battery charging status, as shown

below.

Figure 4-7 Base LEDs

No. Icon LED STATUS

Power on / Data Yellow On = Base is powered.

Yellow Blinking = Base receives data and commands from the Host or

the Reader.

Charging Red On = the Battery is charging.

Charge completed Green On = the Battery is completely charged.

Charging + Charge

completed

Red and Green Blinking together = the Reader is not correctly placed

onto the Base.

The button (3) can be used to force device connection via the HP Scanner Configuration Software

tool, to force a Bluetooth disconnect, and for paging the scanner when it is activated. Refer to the HP

Wireless Barcode Scanner Programming Reference Guide (PRG) for a more detailed explanation.

Charging the Batteries

NOTE: Battery replacement should be done only by a trained technician.

To charge the battery, simply insert the scanner into the base. When the scanner is fully seated in the

cradle, it will sound a “chirp” to indicate that the cradle has detected the scanner connection.

The LEDs on the base (as shown in

Base LEDs on page 13) will indicate the status of the battery.

NOTE: Before using the Battery, read “Battery Safety” in the following section. HP recommends

annual replacement of rechargeable battery packs to ensure maximum performance.

Charging the Batteries 13

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 40 41

Brak uwag

Hp RP7 Retail System Model 7100 Instrukcja Użytkownika Strona 19