HP NetServer NetRAID-4M Instrukcja Użytkownika Pobierz pdf (Strona 12)

HP NetRAID-4M Cluster Services Installation Guide Hardware, Drivers and Utilities

24. When the update is complete, select the option to exit then press E to exit to DOS.

25. Remove the floppy from the server floppy drive and power the server off.

26. Repeat the previous steps 16 – 25 to update the firmware of the HP NetRAID-4M in

Server B.

Connect the NetRAID-4M SCSI Cables

27. Verify that the HP RackStorage/12 units each have two SCSI Controller cards installed, as

shown below:

28. Change the HP RackStorage/12 unit option switch 1 (top) to the Cluster Mode position

(right), as shown below:

29. Insert disk drives into HP RackStorage/12 units, beginning with the left-most slot.

SCSI Controller Cards

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Brak uwag

HP NetServer NetRAID-4M Instrukcja Użytkownika Strona 12