HP MSA70 Array Instrukcja Użytkownika Pobierz pdf (Strona 18)

Installing the enclosure into the rack

To install the enclosure into a rack:

1. Secure the front end of the rails to the rack.

IMPORTANT:

Do not remove the pins from the ends of the rack rails unless you are converting the rails for use

in round-hole racks. These load-bearing pins are designed to fit through the holes without being

removed.

IMPORTANT:

Be sure that the scissor-type locking latches engage the rack fully when the pins extend through

the holes marked with the template.

NOTE:

Identify the left (L) and right (R) rack rails by markings stamped into the sheet metal.

2. Secure the back end of the rails to the rack.

IMPORTANT:

Be sure that the scissor-type locking latches engage the rack fully when the pins extend through

the holes marked with the template.

Installing the enclosure18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Brak uwag

HP MSA70 Array Instrukcja Użytkownika Strona 18