HP 14-3100eb SPECTRE Informacje Techniczne Strona 67

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 98
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 66
4.
Remove the following screws that secure the system board to the base enclosure:
(1) Five Phillips PM2.0×3.8
(2) Four Phillips PM2.0×4.6
(3) One Phillips PM2.0×5.7
5. Lift the right side of the system board (1) until it rests at an angle.
6. Disconnect the power connector cable (2) from the system board.
7. Remove the system board (3) by sliding it up and to the right at an angle.
Reverse this procedure to install the system board.
Component replacement procedures
59
Przeglądanie stron 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 97 98

Komentarze do niniejszej Instrukcji

Brak uwag