HP ProCurve 800 Network Access Controller series Instrukcja Instalacji Pobierz pdf (Strona 14)

2-6

Quick Install

Installing the Appliance

Quick Install

2. Mount the Unit

After determining the configuration and preparing the site, you are ready to

mount the ProCurve NAC 800 appliance in a stable location. The ProCurve

NAC 800 unit can be mounted in a rack or cabinet

Warning For safe operation, please read the mounting precautions on

page 2-3, before mounting a switch.

Rack Mounting the ProCurve NAC 800

The ProCurve NAC 800 appliance is. designed to be mounted in any EIA-

standard 19-inch telco rack or communication equipment cabinet.

Equipment

Cabinet

Note

The 12-24 screws supplied with the unit are the correct threading for standard

EIA/TIA open 19-inch racks. If you are installing the unit in an equipment

cabinet such as a server cabinet, use the clips and screws that came with the

cabinet in place of the 12-24 screws that are supplied with the unit.

Complete step 1, and plan which four holes you will

be using in the cabinet

and install all four clips. Then proceed to step 2.

1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting

brackets to the ProCurve NAC unit with the included 8-mm M4 screws.

Figure 3. ProCurve NAC 800 with mounting brackets

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Brak uwag

HP ProCurve 800 Network Access Controller series Instrukcja Instalacji Strona 14