HP TippingPoint Next Generation Firewall Series Podręcznik Użytkownika Pobierz pdf (Strona 41)

Security Management System CLI Reference 31

NOTE: You must issue the set net.restart=yes command when you modify the IP address or gateway using

the set net command. Changes to these attributes do not take effect until you issue this command. A reboot

(reboot command) should be done after you issue the above command.

For information on set net, see ”set” on page 14.

Related Commands

ifconfig, ipconfig, mgmtsettings

Related Objects

dns

Table 3-11 net Attributes

Attribute Description Type Access Range

net.autoneg

Attribute used to view, and enable/disable

auto-negotiation for the Ethernet

10/100/1000 interface.

Valid values are:

yes or no.

Bool read-write 0

net.duplex

Attribute used to view and change the

duplex setting for the Ethernet

10/100/1000 interface.

Valid values are:

half or full.

String read-write 4

net.gateway

Attribute used to provide the gateway

(default route) value. To clear this value, use

a period (.). Applies only the net object.

The network interface must be restarted

(net.restart) for setting to take effect. See

”Example” on page 30.

IPaddr read-write 0

net.gateway6

Attribute used to provide the IPv6 gateway

value. To clear this value, use a period (.).

Applies only the net object.

The network interface must be restarted

(net.restart) for setting to take effect. See

”Example” on page 30.

IPaddr read-write 0

net.hwaddr

Attribute used to return the Hardware /

MAC (Media Access Control) address for

the Ethernet10/100/1000 interface.

String read-only 17

net.ifc-enable

Attrib used to enable/disable the NIC.

Normally, this should not be done. To

enable the NIC set the value to true, to

disable the value should be set to false.

Bool read-write 0

net.ipaddr

Attribute used to view and change the IP

address for the Ethernet10/100/1000

interface. To clear this value, use a period

(.). Applies only the net object. The network

interface must be restarted (net.restart) for

setting to take effect. When you employ this

command, the CLI may not reflect the

change with a confirmation message. See

”Example” on page 30.

IPaddr read-write 0

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 57 58

Komentarze do niniejszej Instrukcji

Brak uwag

HP TippingPoint Next Generation Firewall Series Podręcznik Użytkownika Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking HP TippingPoint Next Generation Firewall Series