HP X Unified Security Platform Series Podręcznik Użytkownika Pobierz pdf (Strona 53)

configure

X Family CLI Reference V 2.5.1 45

all reset

removes all user changes to all filters’ configuration and resets all filters to the default values.

conf t firewall alg sip

The configure terminal firewall alg sip command configures an application layer gateway (ALG) to

permit Session Initiation Protocol (SIP) sessions.

sdp-port-range [any | port-range]

configures the range of port numbers that SIP sessions can use. You can enter up to 20

separate port ranges, separated by commas, such as:

8000-8500, 10000-12000, 50000-51000

The any parameter enables all ports to accommodate SIP sessions.

services [any | service-name | service-group]

configures the service name or service group that permits SIP operations. The any parameter

enables the use of any service for the sessions.

conf t firewall monitor < clients | services | website >

The configure terminal firewall monitor command controls the collection of statistics related to

firewall sessions. Data is gathered about each session when the session closes down. By default,

monitors are enabled when the device starts up. Data is lost if the device is rebooted.

reset

immediately resets counters.

conf t firewall rule

The configure terminal firewall rule command creates and edits firewalls on the device. The

firewalls control traffic passing between security zones.

add [id] < permit | block | web-filter src-zone dst-zone service >

adds a firewall rule. If no ID is specified, the system assigns one and displays it.

counters-clear

clears counters for all firewall rules.

disable id

disables a firewall rule.

enable id

enables a firewall rule.

move id < after id | before id | to position-number >

moves a firewall rule within the firewall table.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 141 142

Brak uwag

HP X Unified Security Platform Series Podręcznik Użytkownika Strona 53