HP 744 Instrukcja Obsługi Pobierz pdf (Strona 98)

5-4

Powering On and Off

Turning On the System

4 The system displays a sequence of boot messages. The Model 744 boots

from the host system unless it has its own external disk or another LAN-

configured system from which to boot. See Appendix A for configuring

an automatic boot selection. Otherwise, allow the boot to continue.

NOTE: The remaining steps apply for HP-UX. If you are using HP-RT, refer to HP-

RT System Administration Tasks for information on booting an HP-RT

system.

5 During the boot process, a new system displays messages prompting you

for the host name, IP number, and time zone. If you have this information,

enter it as requested. Otherwise, press Enter

You can also enter or update this information later by typing the following

after you log in as root:

set_parms initial Enter

The information is as follows:

a The time zone where your system is located.

b The host name for your system: any alphanumeric, single-word name

with eight or fewer characters.

c The network address number, also called an IP address, for your sys-

tem. This consists of four address fields separated by periods: for ex-

ample, 255.32.3.10. You may need to consult with your system

administrator for this information. Or, if your host name and IP ad-

dress have already been assigned, you can find out the host name, after

boot, by entering uname -a. If you know your host name, you can de-

termine your IP address by entering nslookup host_name, at the sys-

tem prompt.

6 The system prompts you to set a root password at this time.

The system completes the boot sequence and displays the following

prompt:

Console login:

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 143 144

Brak uwag

HP 744 Instrukcja Obsługi Strona 98