HP A-Series Instrukcja Użytkownika

HP A-Series Switches Brand Migration Feature Guide Document version: 6W100-20110808

Slot 1: HP. Migrating an H3C S5800/S5820X switch to an HP A5800/A5820X switch # Load the HP A5800 or A5820X system software image, set it as the ma

Slot 1: 3COM. # Enable brand migration and verify the new brand name. <4210G > oem hp Configuration will take effect after next reboot, and

Configuration is successful. # Verify the new brand name. <4510G>display oem Current OEMs: Slot 1: 3COM. New OEMs: Slot 1: HP. <4510

# Reboot the switch and verify that the current brand has migrated to HP. NOTE: The default baud rate of the console port changes to 9600 bps afte

Brand migration command reference display oem Syntax display oem View User view Default level 1: Monitor level Parameters None Description Use the di

View User view Default level 2: System level Parameters slot slot-number: Specifies the ID of an IRF member switch. If this option is not specified,

Appendix A H3C/3Com to HP switch model mappings H3C to HP switch model mappings H3C Switch model HP switch model S5120-EI series S5120-28C-EI HP

H3C Switch model HP switch model S5800-56C-PWR HP A5800-48G-PoE+ Switch with 1 Interface Slot S5800-60C-PWR HP A5800-48G-PoE+ Switch with 2 Interf

Legal and notice information © Copyright 2011 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitte

Contents About the brand migration feature ···········································································································

About the brand migration feature The brand migration feature automatically replaces H3C or 3Com brand information with HP brand information for an H

Migrating brand information Migration guidelines To make sure that an IRF fabric and all its switches can correctly work after a brand migration, fol

To do… Use the command… Remarks Enable brand migration oem hp [ slot slot-number ] Required In IRF mode, if you do not specify a member switch ID

Brand migration examples Migrating an H3C S5120-EI switch to an HP A5120 EI switch # Use the HP A5120 EI Boot ROM image to upgrade the Boot ROM of th

# Display the brand name of the switch in user view. <H3C> display oem Current OEMs: Slot 1: H3C. New OEMs: Slot 1: H3C. # Enable brand

Do you want to continue?[Y/N]y Configuration is successful. # Verify the new brand name. <H3C> display oem Current OEMs: Slot 1: H3C. Ne