HP Brio 82xx Informacje Techniczne Pobierz pdf (Strona 61)

Accessing Internal Components

Removing and Replacing the Side Panel

To Remove the Side Panel

You are only required to remove the side panel of the PC when removing

or replacing 5.25 inch devices (such as CD-ROM, CD-RW, DVD-ROM or

Zip drives) in the upper expansion shelves.

1 Once the main cover has been removed, loosen the screw on the side

panel.

2 Slide the side panel back by about 2 cm (0.6 inches).

3 LiftthesidepanelupandoffthePC.

To Replace the Side Panel

1 Lower the side panel onto the PC, making sure that the inside of the

panel fits correctly into the guide rail. Leave a gap of about 2 cm (0.6

inches) between the panel and the front of the PC.

2 When you are sure that the inside of the panel fits correctly into the

guide rail, slide the panel towards the front of the PC.

3 Tighten the screw that holds the panel in place.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 113 114

Brak uwag

HP Brio 82xx Informacje Techniczne Strona 61