HP NetServer LH 3000 Przewodnik Instalacji Pobierz pdf (Strona 22)

Chapter 2 Installation

Step 7: Connect Power Harness

1. Orient the connector labeled P2 on the power harness to the power socket

on the backplane of the mass storage cage, as shown in Figure 2-9.

Figure 2-9. Connect Power Harness to Backplane of Mass Storage Cage

2. Connect the P2 connector on the power harness to the power socket on the

backplane of the mass storage cage. Verify that the latch on the connector

is seated.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

Brak uwag

HP NetServer LH 3000 Przewodnik Instalacji Strona 22