HP Pavilion 403 Informacje Techniczne Strona 95

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 150
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 94
Remove the system board:
1. Disconnect the following cables from the system board:
(1) USB board cable
(2) Power connector cable
(3) Subwoofer cable
(4) Speaker cable
2. Remove the two Phillips PM2.5×5.0 screws (1) that secure the system board to the base
enclosure.
3. Lift up on the right side of the system board until it is at approximately a 45-degree angle (2), and
then lift the system board to the right and up and out of the base enclosure (3).
Reverse this procedure to install the system board.
Component replacement procedures
85
Przeglądanie stron 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 149 150

Komentarze do niniejszej Instrukcji

Brak uwag