HP Pavilion DV6057 Informacje Techniczne

HP Pavilion dv6 Entertainment PCMaintenance and Service Guide

Category Description Computerswith discretegraphicsComputersUMAgraphics Support for BD playback with HD Decode, and DX10 √ √Panels●15.6-inch WXGA (13

Fan/heat sink assemblyNOTE: The fan/heat sink assembly spare kit includes replacement thermal material.Description Spare part numberFor use only with

CAUTION: Loosen the screws in the order indicated by the callouts to ensure consistent pressureover the processor board.4. Loosen the three Phillips P

6. Turn the system board upside down, with the expansion port 3 and external monitor port towardyou.7. Disconnect the fan cable (1) from the system bo

10. Remove the fan/heat sink assembly (7).NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sinkassembly and syst

ProcessorNOTE: The processor spare part kit includes thermal material.Description Spare part numberAMD Turion Ultra ZM-87, 2.40-GHz with 2-MB L2 cache

2. Lift the processor (2) straight up and remove it.NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossedon

5 Setup UtilityWARNING! Only authorized technicians trained by HP must repair this equipment. All troubleshootingand repair procedures are detailed to

Using the Setup UtilityChanging the language of the Setup UtilityThe following procedure explains how to change the language of the Setup Utility. If

Displaying system informationThe following procedure explains how to display system information in the Setup Utility. If the SetupUtility is not open,

After either choice, the computer restarts in Windows.Setup Utility menusThe menu tables in this section provide an overview of Setup Utility options.

Category Description Computerswith discretegraphicsComputersUMAgraphics Single hard drive configurations:●160 GB (5400 rpm)●250 GB (7200 rpm) (select

Select To do thisFan Always On Enable/disable Fan Always On. When enabled, the computer fan willalways be on.Boot Options Set the following boot optio

6 SpecificationsComputer specifications Metric U.S.DimensionsWidth37.85 cm 14.9 inDepth 25.8 cm 10.12 inHeight (front to back) 3.4 1.34Weight – Brigh

15.6-inch, WXGA display specifications Metric U.S.DimensionsHeight21.0 cm 8.27 inWidth 35.9 cm 14.1 inDiagonal 39.5 cm 15.6 inNumber of colors Up to

16.0-inch WXGA BrightView display specifications Metric U.S.DimensionsHeight21.4 cm 8.4 inWidth 36.5 cm 14.4 inDiagonal 40.6 cm 16 inNumber of colors

16.0-inch WXGA AntiGlare display specifications Metric U.S.DimensionsHeight21.4 cm 8.4 inWidth 36.5 cm 14.4 inDiagonal 40.6 cm 16 inNumber of colors

Hard drive specifications 500-GB* 320-GB* 250-GB* 160-GB*Dimensions Height 9.5 mm 9.5 mm 9.5 mm 9.5 mmWidth 70 mm 70 mm 70 mm 70 mmWeight 101 g 101

Blu-ray ROM DVD±R/RW SuperMulti Double-Layer DrivespecificationsApplicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI,CDTEXT, CD-ROM, CD-ROM XA,MIXED

DVD±RW SuperMulti Double-Layer Combo DrivespecificationsApplicable disc Read:CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I,

System DMA specificationsHardware DMA System functionDMA0 Not applicableDMA1* Not applicableDMA2* Not applicableDMA3 Not applicableDMA4 Direct memory

System interrupt specificationsHardware IRQ System functionIRQ0 System timerIRQ1 Standard 101-/102-Key or Microsoft® Natural KeyboardIRQ2 CascadedIRQ3

Category Description Computerswith discretegraphicsComputersUMAgraphics Support for TV tuner antennas for both DVB-T and ATSC/NTSC√ External media c

System I/O address specificationsI/O address (hex) System function (shipping configuration)00-1F DMA Controller Channel 0-3CF7 PCI Bus on MS ACPI-Comp

I/O address (hex) System function (shipping configuration)BC - BD Programmable Interrupt Controller (Aliases)C0 - DF DMA Controller Channel 4-7F0 Nume

System memory map specificationsSize Memory address System function640 KB 00000000-0009FFFF Base memory128 KB 000A0000-000BFFFF Video memory48 KB 000C

7 Screw listingThis section provides specification and reference information for the screws used in the computer. Allscrews listed in this section are

Phillips PM2.0×3.0 screwColor Quantity Length Thread Head diameterSilver 23 3.0 mm 2.0 mm 4.5 mmWhere used: One screw that secures the Bluetooth modul

Where used: 3 screws that secure the keyboard to the computerWhere used:(1) One screw that secures the WLAN module to the system board(2) One screw th

Where used: 4 screws that secure the display hinges to the display bezel on computers equipped withBrightView display assembliesWhere used: 8 screws t

Phillips PM2.0×14.0 captive screwColor Quantity Length Thread Head diameterSilver 6 14.0 mm 2.0 mm 4.5 mmWhere used: 3 screws (secured by C-clips) tha

Where used: 3 screws (secured by C-clips) that secure the UMA fan and heat sink to the system board120 Chapter 7 Screw listing

Phillips PM2.5×3.0 screwColor Quantity Length Thread Head diameterBlack 2 3.0 mm 2.5 mm 4.5 mmWhere used: 2 screws that secure the modem module to the

Category Description Computerswith discretegraphicsComputersUMAgraphics 6-cell 2.20-Ah Li-ion battery with target life of 2.25 hours √ 12-cell 8.8

Phillips PM2.5×4.0 screwColor Quantity Length Thread Head diameterBlack 17 4.0 mm 2.5 mm 4.5 mmWhere used: 3 screws that secure the switch cover to th

Where used: One screw that secures the top cover to the computerWhere used: 4 screws that secure the top cover to the computerWhere used: 8 screws tha

Phillips PM2.5×6.0 screwColor Quantity Length Thread Head diameterBlack 5 6.0 mm 2.5 mm 4.5 mmWhere used: 5 screws that secure the speaker to the top

Phillips PM2.0×2.0 broadhead screwColor Quantity Length Thread Head diameterBlack 1 2.0 mm 2.0 mm 7.0 mmWhere used: One screw that secures the fingerp

Phillips PM2.5×5.0 screwColor Quantity Length Thread Head diameterBlack 18 5.0 mm 2.5 mm 4.4 mmWhere used: 4 screws that secure the display inverter c

Where used: 4 screws that secure the display enclosure to the display bezel on computers equippedwith AntiGlare display assembliesWhere used: 8 screws

Phillips PM2.5×5.0 captive screwColor Quantity Length Thread Head diameterBlack 5 5.0 mm 2.5 mm 4.5 mmWhere used: 3 screws (secured by C-clips) that s

Where used: 2 screws (secured by C-clips) that secure the UMA fan and heat sink to the system boardPhillips PM2.5×5.0 captive screw 129

Phillips PM2.5×5.5 captive screwColor Quantity Length Thread Head diameterBlack 5 5.5 mm 2.5 mm 4.4 mmWhere used:(1) 3 captive screws that secure the

Phillips PM2.5×7.0 screwColor Quantity Length Thread Head diameterBlack 26 7.0 mm 2.5 mm 4.4 mmWhere used:(1) One screw that secures the USB board to

2 External component identificationTop componentsTouchPadComponent Description(1) TouchPad light●White: TouchPad is enabled.●Amber: TouchPad is disabl

Where used: 4 screws that secure the keyboard to the computerWhere used: 2 screws that secure the switch cover to the keyboardWhere used: 4 screws tha

Where used: One screw that secures the power connector bracket to the base enclosureWhere used: One screw that secures the optical drive to the comput

Where used: 2 screws that secure the display bezel to the display on computers equipped withBrightView display assembliesPhillips PM3.0×3.5 screwColor

8 Backup and RecoveryRecovering system informationRecovery after a system failure is as complete as your most current backup. HP recommends that youcr

Creating recovery discsNOTE: HP recommends that you create recovery discs to be sure that you can restore your systemto its original factory state if

Backing up your informationWhen to back up●On a regularly scheduled basisNOTE: Set reminders to back up your information periodically.●Before the comp

Create a system restore point1. Select Start > Control Panel > System and Maintenance > System.2. In the left pane, click System Protection.3

Performing a recoveryNOTE: You can recover only files that you have previously backed up. HP recommends that you useRecovery Manager to create an enti

9 Connector pin assignments1394Pin Signal1 Power2 Ground3 TPB-4 TPB+5 TPA-6TPA+Audio-in (microphone)Pin Signal1 Audio signal in2 Audio signal in3 Grou

Audio-out (headphone)Pin Signal1 Audio out, left channel2 Audio out, right channel3GroundExternal monitorPin Signal1 Red analog2 Green analog3 Blue an

LightsComponent Description(1) Power lights* (2)●On: The computer is on.●Blinking: The computer is in the Sleep state.●Off: The computer is off or in

HDMIPin Signal1 Transition minimized differential signal (TMDS) data 2+2 TMDS data 2 shield3 TMDS data 2–4 TMDS data 1+5 TMDS data 1 shield6 TMDS data

RJ-11 (modem)Pin Signal1 Unused2 Tip3 Ring4 Unused5 Unused6UnusedRJ-45 (network)Pin Signal1 Transmit +2 Transmit -3 Receive +4 Unused5 Unused6 Receive

Universal Serial BusPin Signal1 +5 VDC2 Data -3 Data +4 Ground144 Chapter 9 Connector pin assignments

10 Power cord set requirementsThe wide range input feature of the computer permits it to operate from any line voltage from 100 to 120volts AC or from

Requirements for specific countries or regionsCountry or region Accredited agency Applicable note numberAustralia EANSW 1Austria OVE 1Belgium CEBC 1Ca

11 RecyclingBatteryWhen a battery has reached the end of its useful life, do not dispose of the battery in general householdwaste. Follow the local la

Perform the following steps to disassemble the display assembly:1. Remove all screw covers (1) and screws (2) that secure the display bezel to the dis

4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).5. Remove all screws (1) that secure the display pane

10. Remove the display panel frame (2) from the display panel.11. Remove the screws (1) that secure the backlight cover to the display panel.12. Lift

15. Remove the backlight cables (1) from the clip (2) in the display panel.16. Turn the display panel upside down.17. Remove the backlight frame from

Component Description(11) Stop light (select models only) On: The stop button has been pressed.(12) Wireless light●Blue: An integrated wireless device

18. Remove the backlight from the backlight frame.19. Disconnect the display cable (1) from the LCD panel.20. Remove the screws (2) that secure the LC

IndexSymbols/Numerics1394 portidentifying 14pin assignments 1401394 Power Saving 101AAC adapter, spare partnumbers 30, 31administrator password 101an

display bezelillustrated 27release 49spare part number 27, 34, 75display cable, spare partnumbers 27, 34display componentsillustrated 20, 27recycli

keypad keys, identifying 11keysesc 11fn 11function 11keypad 11Windows applications 11Windows logo 11LLAN Power Saving 101language support 101latch, ba

Ethernet 3external media cards 4graphics 1hard drives 2keyboard 4memory module 2microphone 3modem 3operating system 5optical drives 3pointing device 4

USB boardremoval 85spare part number 21, 34, 85USB cableillustrated 29USB ports, identifying 13, 14using system restore 137Vvents, identifying 13,

Buttons, speakers and fingerprint readerComponent Description(1) Speakers (2) Produce sound.(2) Power button*●When the computer is off, press the butt

Component Description(7) Next/fast forward button (select models only)●Plays the next track or chapter when the button is pressedonce.●Fast forwards m

KeysComponent Description(1) esc key Displays system information about your computer when pressed incombination with the fn key.(2) fn key Executes fr

© Copyright 2009 Hewlett-PackardDevelopment Company, L.P.AMD Athlon, ATI Mobility Radeon, AMDSempron, and AMD Turion are trademarks ofAdvanced Micro D

Front componentsComponent Description(1) Power light●On: The computer is on.●Blinking: The computer is in the Sleep state.●Off: The computer is off or

Rear componentComponent DescriptionVent Enables airflow to cool internal components.NOTE: The computer fan starts up automatically to cool internalcom

Left-side componentsComponent Description(1) External monitor port Connects an external VGA monitor or projector.(2) Expansion port 3 Connects the com

Bottom componentsComponent Description(1) Hard drive bay Holds the hard drive.(2) Vents (8) Enable airflow to cool internal components.NOTE: The compu

Display componentsComponent Description(1) Internal display switch Turns off the display and initiates Sleep if the display is closed whilethe power i

Wireless antennas (select models only)On select computers, at least 2 antennas send and receive signals from one or more wireless devices.NOTE: The an

3 Illustrated parts catalogService tagWhen ordering parts or requesting information, provide the computer serial number and modeldescription provided

Computer major componentsItem Description Spare part number(1) Display assembly (includes webcam, 2 microphones, and 2 wireless antenna transceivers a

Item Description Spare part number ●LED display for use in white computers538349-001 ●LED display for use in black computers538351-001 ●LED display fo

Item Description Spare part number(6) Top cover (includes TouchPad and TouchPad buttons) For use only with white computers equipped with a fingerprint

Safety warning noticeWARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do notplace the computer directly on

Item Description Spare part number(14) WLAN module Atheros 9285G 802.11b/g WiFi Adapter for use in Canada, the Cayman Islands, Guam,Puerto Rico, the U

Item Description Spare part number Broadcom BCM4312 802.11b/g WLAN module for use only with computers inAntigua and Barbuda, Barbados, Belize, Canada

Item Description Spare part number Broadcom BCM4312 802.11b/g WLAN module for use only with computers inAfghanistan, Albania, Algeria, Andorra, Angol

Item Description Spare part number For use in computers with discrete graphics subsystems 532139-001 For use in computers with UMA graphics subsyste

Display assembly componentsThe HP Pavilion dv6 Entertainment PC offers two types of display assemblies. Component spare partsare listed in this sectio

BrightView display assembly spare partsItem Description Spare part number(1) Display bezel (includes logo and display lid switch actuator magnet) F

Item Description Spare part number(7) Display enclosure (includes wireless antenna transceivers and cables and logo LEDboard and cable) For use in w

Cable KitItem Description Spare part number Cable Kit 533466-001(1) Fingerprint reader cable(2) Audio/Infrared module cable(3) Modem module cable (in

Miscellaneous partsDescription Spare part numberNotebook sleeve, 16-inch, white 533534-001AC adapters65-W AC adapter463958-00190-W AC adapter 463955-0

Description Spare part numberWireless laser mouse 430958-001Screw Kit●Phillips PM2.0×3.0 screws●Phillips PM2.0×14.0 captive screws●Phillips PM2.5×3.0

iv Safety warning notice

Spare partnumberDescription490371-031 Power cord for use in the United Kingdom and Hong Kong490371-061 Power cord for use in Italy490371-081 Power cor

Spare partnumberDescription504664-002 Broadcom BCM4312 802.11b/g WLAN module for use only with computers in Afghanistan, Albania,Algeria, Andorra, Ang

Spare partnumberDescription509450-001 System board for use with computers equipped with discrete graphics subsystem memory and 1 GB ofdedicated memory

Spare partnumberDescription517861-001 Display enclosure for use in white computers equipped with AntiGlare display panels (includes wirelessantenna tr

Spare partnumberDescription517864-221 White painted keyboard for use in the Czech Republic517864-251 White painted keyboard for use in Russia517864-28

Spare partnumberDescription518437-002 Atheros 9280AGN 802.11a/b/g/n WiFi Adapter for use in Canada, the Cayman Islands, Guam, PuertoRico, the United S

Spare partnumberDescription518965-111 Black molded keyboard for use in Switzerland518965-131 Black molded keyboard for use in Portugal518965-141 Black

Spare partnumberDescription538313-001 16.0-inch WXGA BrightView LED display assembly for use in black computers538314-001 15.6-inch WXGA AntiGlare LED

Spare partnumberDescription570228-A41 Black textured keyboard for use in Belgium570228-DJ1 Black textured keyboard for use in Greece570228-AB1 Black t

4 Removal and replacement proceduresPreliminary replacement requirementsTools requiredYou will need the following tools to complete the removal and re

Table of contents1 Product description2 External component identificationTop components ...

Cables and connectorsCAUTION: When servicing the computer, be sure that cables are placed in their proper locationsduring the reassembly process. Impr

Grounding guidelinesElectrostatic discharge damageElectronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure

Packaging and transporting guidelinesFollow these grounding guidelines when packaging and transporting equipment:●To avoid hand contact, transport pro

Equipment guidelinesGrounding equipment must include either a wrist strap or a foot strap at a grounded workstation.●When seated, wear a wrist strap c

Component replacement proceduresThis chapter provides removal and replacement procedures.There are as many as 112 screws, in 11 different sizes, that

Computer feetThe computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Feet Kit, sparepart number 516499-001. There are 4

BatteryDescription Spare part number12-cell, 95-Wh, 8.8-Ah Li-ion battery 509460-0016-cell, 55-Wh, 2.55-Ah Li-ion battery 509459-0016-cell, 47-Wh, 2.2

Webcam/microphone moduleNOTE: This section applies only to computers equipped with BrightView display assemblies. SeeDisplay assemblyon page 68 for we

4. Release the display bezel top edge (3) from the display enclosure.5. Release the webcam/microphone module (1) from the display enclosure as far as

Optical driveNOTE: The optical drive spare part kit includes an optical drive bezel and bracket.Description Spare part numberBlu-ray ROM DVD±R/RW Supe

Cables and connectors ... 42Drive handling ...

7. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the opticaldrive.8. Remove the optical drive bracket (2).Reve

Memory moduleDescription Spare part number4 GB memory module (DDR2, 800-MHz, PC2-6400, 1-DIMM) 509409-0022 GB memory module (DDR2, 800-MHz, PC2-6400,

5. Remove the module (2) by pulling it away from the slot at an angle.NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertio

TV tuner moduleNOTE: The TV tuner module spare part kit does not include a TV tuner module cable. The TV tunermodule cable is included in the Cable Ki

RTC batteryDescription Spare part numberRTC battery 449729-001Before removing the RTC battery, follow these steps:1. Shut down the computer. If you ar

Hard driveNOTE: The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar coverwith tab, and 4 rubber isolators.De

3. Lift the right side (2) of the hard drive cover, swing it up and to the left, and remove the cover (3).The hard drive cover is included in the Plas

7. If it is necessary to replace the hard drive bracket or any of the hard drive bracket components,remove the following:(1) Hard drive adapter cable(

WLAN moduleDescription Spare part numberAtheros 9285G 802.11b/g WiFi Adapter for use in Canada, the Cayman Islands, Guam, PuertoRico, the United State

Description Spare part numberBroadcom BCM4312 802.11b/g WLAN module for use only with computers in Afghanistan,Albania, Algeria, Andorra, Angola, Anti

Main menu ... 101Security menu ...

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet andthen unplugging the AC adapter from the computer.4.

Switch cover and keyboardNOTE: Only select models are equipped with media buttons on the switch cover.Description Spare part numberSwitch cover for us

2. Remove the following screws:(1) Two Phillips PM2.5×6.5 screws that secure the switch cover to the computer(2) Three Phillips PM2.5×5.0 screws that

6. Move the switch cover back so it rests on the display.7. Remove the three Phillips PM2.0×3.0 screws that secure the keyboard to the computer.8. Lif

10. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is connected anddisconnect the cable (2) from the system board.11

Power button boardDescription Spare part numberPower button board (includes cable) 512834-001Before removing the power button board, follow these step

Display assemblyNOTE: The display assembly includes a webcam, 2 microphones, and 2 wireless antenna transceiversand cables.Description Spare part numb

5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 60).6. Remove the switch cover and keyboard (see Switch cover

4. Remove the display assembly (2).NOTE: Steps 5 through 27 provide display assembly internal component removal information forcomputers equipped with

9. Disconnect the display logo cable (3) from the display panel cable.10. Remove the WLAN antenna cables and the webcam cable (4) from the left hinge.

Recovering from the dedicated recovery partition (select models only) ... 1399 Connector pin assignments1394 ...

15. Slide the webcam/microphone module to the right, and then lift it from the display (2).16. Disconnect the webcam/microphone module cable (3) from

23. Remove the cable from the clip on the right display hinge (4).24. If it is necessary to replace the display hinges, remove the four Phillips PM2.5

27. If you need to remove the horizontal bracket from the vertical hinge brackets, remove the twoPhillips PM2.0×5.0 screws (1) that connect the bracke

30. Remove the display bezel (4). The display bezel is available using spare part number 512359-001(16-inch display) or 512364-001 (15.6-inch display)

34. If it is necessary to replace the display panel, remove the two Phillips PM2.5×5.0 screws (1) fromthe top corners and the six Phillips PM2.5×5.0 s

37. Remove the display hinges (2). The display hinges are available in the Display Hinge Bracket Kit,spare part 512360-001 (16-inch display) or 512365

SpeakerDescription Spare part numberSpeaker 533865-001Before removing the speaker, follow these steps:1. Shut down the computer. If you are unsure whe

Bluetooth moduleNOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetoothmodule cable is available using spar

Top coverDescription Spare part numberFor use only with white computers equipped with a fingerprint reader 518109-001For use only with white computers

3. Remove the Phillips PM2.5×4.0 screw (2) that secures the top cover to the computer. This screwis in the battery bay.4. Turn the computer right-side

1 Product descriptionCategory Description Computerswith discretegraphicsComputersUMAgraphicsProduct Name HP Pavilion dv6 Entertainment PC √ √Processor

6. Remove the four Phillips PM2.5×4.0 screws that secure the top cover to the computer.7. Lift the rear edge (1) of the top cover until it rests at an

Modem moduleNOTE: The modem module spare part kit does not include a modem module cable. The modemmodule cable is included in the Cable Kit, spare par

3. Lift the modem module (3) straight up to disconnect it from the system board.Reverse this procedure to install the modem module.Audio/infrared boar

Remove the audio/infrared board:1. Disconnect the audio/infrared board cable (1) from the LIF connector on the system board.2. Remove the Phillips PM2

d. Display assembly (see Display assembly on page 68).e. Top cover (see Top cover on page 80).Remove the USB board:1. Disconnect the USB board cable (

d. Display assembly (see Display assembly on page 68).e. Top cover (see Top cover on page 80).f. USB board (see USB board on page 85).g. System board

System boardNOTE: The system board spare kit includes replacement thermal material.Description Spare part numberFor use with computers equipped with d

2. Disconnect the following cables from the system board:(2) Audio/infrared board cableNOTE: The audio/infrared board cable connects to a LIF connecto

TV tuner module cableNOTE: The TV tuner module cable is available in the Cable Kit, spare part number 533466-001.Before removing the TV tuner module c

Modem module cableNOTE: The modem module cable is available in the Cable Kit, spare part number 533466-001. Themodem module cable includes the RJ-11 j