HP Ink Tank 310 Instrukcja Użytkownika Pobierz pdf (Strona 17)

Cause Solution

The printer is in an error state. Reset the printer.

1. Turn o the printer.

2. Unplug the power cord.

3. Wait a minute, and then plug the power cord back in.

4. Turn on the printer.

If the problem persists, contact HP.

● The Number of copies icon is alternating between the letter E and the number 7.

Cause Solution

The printer has reached the maximum number of primes

allowed.

Contact HP support for help.

Ink system maintenance

The Number of copies icon is alternating between the letter E and the number 9. At the same time, the Error

icon and the Resume light are blinking.

Cause Solution

Ink system maintenance is required. Do the following to clear the error:

● Check the ink tanks and add more ink if needed. For more

information, see Rell ink tanks on page 41.

● Open the printhead access door completely, and then close it

to remove ink buildup in the printer.

NOTE: Do not open the printhead latch.

12 Chapter 2 Get started ENWW

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 97 98

Brak uwag

HP Ink Tank 310 Instrukcja Użytkownika Strona 17