HP StorageWorks Enterprise File Services WAN Accelerator Podręcznik Użytkownika Pobierz pdf (Strona 61)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE 55

6 - POLICY-BASED ROUTING

EPLOYMENTS

Client-Side HP EFS WAN Accelerator

Attached to an Inside Router

In this deployment, PBR is enabled on the router interface connected to the Layer-2

switch that redirects traffic to the HP EFS WAN Accelerator. The same PBR rules

should not be enabled on the WAN router (or any other router on the way to the WAN).

Figure 6-5. Client-Side HP EFS WAN Accelerator Attached to an Inside Router

Basic Steps

(Client-Side)

Perform the steps for “Basic Steps (Client-Side)” on page 50. Make sure that you

configure different PBR rules for the second router.

Basic Steps

(Server-Side)

Perform the steps for “Basic Steps (Server-Side)” on page 51.

PBR Between VLANs

If there is not a clear physical separation between the client and the HP EFS WAN

Accelerator on the router where PBR is defined, you can use Virtual Local Area

Networks (VLANs) to create a virtual separation.

In the following figure, the HP EFS WAN Accelerator is configured in a different

VLAN than the client VLAN, and PBR is enabled on the client VLAN interface and

disabled on the HP EFS WAN Accelerator VLAN interface.

Figure 6-6. PBR Between VLANs

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 123 124

Brak uwag

HP StorageWorks Enterprise File Services WAN Accelerator Podręcznik Użytkownika Strona 61