HP Modular Smart Array 500 Starter Kit Podręcznik Użytkownika Pobierz pdf (Strona 84)

set controller-date

Description Sets the date and time for each Management Controller and then updates the date and time for

each Storage Controller.

Syntax

set controller-date jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec day

hh:mm:ss year time-zone [ntp enabled|disabled] [ntpaddress IP-address]

Parameters jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec

The month.

day

The day number (1–31).

hh:mm:ss

The hour on a 24-hour clock (0–23), the minutes (0–59), and the seconds (0–59).

year

The year as a four-digit number.

time-zone

The system's time zone based on an offset from Universal Time (UT) in hours.

ntp enabled|disabled

Optional. Enables use of Network Time Protocol (NTP). If an NTP server is available, the controller's

time is synchronized with the server. When enabling NTP you must specify all the parameters but

only the ntpaddress and time-zone parameters must be set accurately; the other parameters

are ignored. When NTP is enabled, a client task becomes active.

Example Set the controller date to 1:45 PM on September 22, 2006 in the U.S. Mountain time zone (GMT

-07:00):

# set controller-date sep 22 13:45:0 2007 -7

Success: Command completed successfully

Enable NTP using a specified time-zone offset and NTP server address:

# set controller-date sep 22 13:45:0 2007 -7 ntp enabled ntpaddress 69.10.36.3

Success: Command completed successfully

Brak uwag

HP Modular Smart Array 500 Starter Kit Podręcznik Użytkownika Strona 84