Hp Hub & Switch Management for OV-UX Instrukcja Użytkownika Pobierz pdf (Strona 70)

8-6

Setting Up Security for a Device

Set Security Policy for Selected Ports

Setting Up Security for a

Device

Note: In order for traps to function, you must also set the trap in the

Thresholds dialog box, as follows:

1. Using the right mouse button, click on the device symbol in the HP

Network Node Manager map.

2. Select

SNMP Configuration

3. Select the Thresholds tab and set the thresholds for the traps you are

interested in receiving.

4. Select the Trap Receivers tab and set the management stations that can

capture traps.

5. Select the Authorized Managers tab and set the management stations that

can send and receive SNMP requests for the device.

Disable Port

If the Disable Port parameter displays “yes”, the port may be disabled when

an unrecognized address is received. Disabling the port depends on the

Address Selection parameter that you have chosen. The settings

First Heard

and

Assigned

will disable the port if a new address is heard on that port. The

port will not be disabled when a new address is learned if the setting is

Continuous

Set Security Policy for Selected Ports

You can set the security policy port by port, or by selecting a group of ports.

Select one port by clicking on the entry in the Port Security page. To select

more than one port, you can Ctrl-click on each port you want to include, or

to select a range of contiguous ports, click on the first port in the range, then

shift-click on the last port to be included. Click the

Set Security Policy for

Selected Ports

button. Select the parameters that you want to assign.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 103 104

Brak uwag

Hp Hub & Switch Management for OV-UX Instrukcja Użytkownika Strona 70