HP NAS 8000 Clustered Solution Instrukcja Użytkownika Pobierz pdf (Strona 57)

Configuring Your System and Network 55

Configuring Your System and

Network

If you have DHCP enabled, NIC configuration occurs automatically.

Depending on your configuration, the DHCP server provides any or all of the

following parameters: IP Address, Subnet Mask, Gateway Address,

Broadcast Address, and DNS Domain Name.

To edit the IP configuration for a NIC port:

1 In the Command View NAS web interface, click the Configuration tab.

2 Navigate down the tree to TCP/IP > IP Addresses. A table lists:

— NIC Ports and Bond Channels

— Address configuration (whether it is manual, DHCP or bonded to a

bond channel)

— IP Address

— Gateway Address

— Subnet Mask

— Broadcast Address

— Management Port

— MAC Address

— Card speed

3 Select the Port you want to edit then select Actions > Edit Selected IP

Configuration.

4 Select an address configuration (manual or DHCP) from the drop-down

list. For a manual configuration, enter the IP Address, Gateway Address,

Subnet Mask, and Broadcast Address.

5 Click OK.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 239 240

Brak uwag

HP NAS 8000 Clustered Solution Instrukcja Użytkownika Strona 57