HP PROCURVE 3400CL-24G Instrukcja Użytkownika Pobierz pdf (Strona 86)

Enhancements

Release M.10.04 Enhancements

Enabling/Disabling TFTP

The TFTP server and client can be enabled and/or disabled independently.

Enabling/Disabling SNMP

To enable/disable SNMP, use the following commands.

Notes

■ The SNMP port (161) will be opened if either SNMP v1/2 or SNMP v3 are enabled, or remain

closed if both are disabled.

■ The snmp-server enable command takes precedence over the snmp-server enable traps

command that is used to enable or disable authentication traps to be sent when a manage-

ment station attempts an unauthorized access.

■ If SNMP is disabled, both the SNMP port (161) and the stacking port (1507) will remain

closed.

Enabling/Disabling RIP

To enable/disable RIP, use the following command.

Syntax: [no] tftp < client | server >

Enables or disables the TFTP client.

client: Enables or disables the TFTP client.

(Default: disabled)

server: Enables or disables the TFTP server.

(Default: disabled)

Note: Both the tftp command (with no arguments) and the tftp client command can be used to enable

or disable the tftp client.

Syntax: [no] snmp-server enable

Enables or disables SNMP v1/v2.

(Default: disabled)

Syntax: [no] snmpv3 enable

Enables or disables SNMP v3.

(Default: disabled)

Syntax: [no] router rip

Enables, disables, or configures Routing Internet Protocol (RIP) on the switch.

(Default: disabled)

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 196 197

Brak uwag

HP PROCURVE 3400CL-24G Instrukcja Użytkownika Strona 86