Hp StorageWorks 3000 RAID Array Instrukcja Użytkownika Pobierz pdf (Strona 122)

5-2 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models)

Backing up Data Files

You should consistently back up your data files to ensure their integrity. Make

sure you have a consistent and comprehensive subsystem backup policy in

place while using command console. If you do not maintain consistent

backups of your data, you put it at risk.

Following good subsystem management practice, you should back up the data

on your disk drives to aid in recovery if there is a primary system failure, if the

integrity of a storage device becomes questionable, or if you experience gross

user error.

The client software does not automatically back up your data for you. Use the

appropriate host backup utilities for this purpose.

Updating Controller Firmware

See the release notes for your version of client for information and restrictions

on downloading various versions of controller software. You can upgrade your

firmware using a network or a SCSI connection as follows:

NOTE: If the operating system is installed on the RA3000, you cannot use SWCC to

download firmware. Refer to the Getting Started RAID Array 3000 Installation Guide for

your operating system and platform.

1. From the Storage menu, select Controller, then Update Firmware

(Figure 5– 1).

Figure 5-1. Update firmware command

1 2 ... 117 118 119 120 121 122 123 124 125 126

Brak uwag

Hp StorageWorks 3000 RAID Array Instrukcja Użytkownika Strona 122