Hp StorageWorks XP Remote Web Console Software Instrukcja Użytkownika Pobierz pdf (Strona 27)

Flex Copy XP user guide 27

Figure 17 shows an example of the configuration used for the procedure.

Figure 17 RAID Manager XP configuration example

The following procedure shows how to edit the configuration definition file. After performing the following

procedure, you can create or delete Flex Copy XP pairs using the paircreate or pairsplit-S

command.

1. Define paths to the internal LU where the external LU is mapped.

The procedure to set paths to the internal LU, where the external LU is mapped, is exactly the same as

the procedure for the actual local array volume. For instructions, see the HP StorageWorks LUN

Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200.

According to Figure 17, LDEV# = 11 is set to CL1-B in this example.

2. Check the connection configuration using the raidscan command.

• Make the configuration definition file without HORCM_DEV and HORCM_INST as follows:

horcm0.conf

HORCM_MON

#ip_address service poll(10ms) timeout(10ms)

127.0.0.1 52050 1000 3000

HORCM_CMD

#dev_name dev_name dev_name

/dev/rdsk/c1t2d3

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 53 54

Brak uwag

Hp StorageWorks XP Remote Web Console Software Instrukcja Użytkownika Strona 27