HP 2201ca Instrukcja Obsługi Strona 1

Przeglądaj online lub pobierz Instrukcja Obsługi dla Tablety HP 2201ca. HP 2201ca Maintenance and Service Guide Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj

Podsumowanie treści

Strona 1 - 2101 Tablet

HP 10 Plus 2201 Tablet and HP 102101 TabletMaintenance and Service GuideIMPORTANT! This document is intended forHP authorized service providers only.

Strona 2

3 Illustrated parts catalogLocating the tablet part number and serial numberThe tablet part number (1) and serial number (2) are located on the tablet

Strona 3 - Safety warning notice

Tablet major componentsItem Component Spare part number(1) Back cover (includes rear-facing webcam lens) 782396-001(2) Speaker Kit (includes left and

Strona 4

Item Component Spare part number Equipped with an Allwinner A31 ARM Cortex-A7 quad core 1.0-GHz processor, and2.0-GB of system memory for use only on

Strona 5 - Table of contents

Miscellaneous partsComponent Spare part number5-V/3-A AC adapter:For use in Argentina on all tablet models 757042-001For use in Australia on all table

Strona 6

Sequential part number listingSpare part number Description745229-001 5-V/3-A AC adapter for use in North America on all tablet models745230-001 USB e

Strona 7 - 1 Product description

Spare part number Description784330-001 System board equipped with an Allwinner A31 ARM Cortex-A7 quad core 1.0-GHz processor,2.0-GB of system memory,

Strona 8

4 Removal and replacementpreliminary requirementsTools requiredYou will need the following tools to complete the removal and replacement procedures:●F

Strona 9

Drive handlingCAUTION: Drives are fragile components that must be handled with care. To prevent damage tothe tablet, damage to a drive, or loss of inf

Strona 10 - 3 Illustrated parts catalog

CAUTION: To prevent damage to the tablet when you are removing or installing internalcomponents, observe these precautions:Keep components in their el

Strona 11 - Tablet major components

Packaging and transporting guidelinesFollow these grounding guidelines when packaging and transporting equipment:●To avoid hand contact, transport pro

Strona 12

© Copyright 2014 Hewlett-PackardDevelopment Company, L.P.Bluetooth is a trademark owned by itsproprietor and used by Hewlett-PackardCompany under lice

Strona 13 - Miscellaneous parts

Equipment guidelinesGrounding equipment must include either a wrist strap or a foot strap at a grounded workstation.●When seated, wear a wrist strap c

Strona 14

5 Removal and replacementproceduresCAUTION: Tablet components described in this chapter should only be accessed by an authorizedservice provider. Acce

Strona 15

3. Swing the back cover (2) up and back until it completely separates fromthe display panel assembly.4. Remove the back cover (3).Reverse this procedu

Strona 16 - 4 Removal and replacement

Remove the battery:1. Unsolder the battery cables from the system board in the following sequence:(1) Black battery cable(2) White battery cable(3) Re

Strona 17 - Grounding guidelines

Reverse this procedure to install the battery.SpeakersDescription Spare part numberSpeaker Kit (includes left and right speakers and cables) 784328-00

Strona 18

3. Unsolder the right speaker cables (2) from the contact points on the system board.NOTE: When installing the speakers, the right speaker red cable a

Strona 19

Remove the Wifi antenna:1. Unsolder the battery cables from the system board in the following sequence:(1) Black battery cable(2) White battery cable(

Strona 20

4. Detach the Wifi antenna transceiver (3) from the display panel assembly. (The Wifi antennatransceiver is attached to the display panel assembly wit

Strona 21 - 5 Removal and replacement

Remove the GPS antenna:1. Unsolder the battery cables from the system board in the following sequence:(1) Black battery cable(2) White battery cable(3

Strona 22 - Description Spare part number

4. Detach the GPS antenna transceiver (3) from the display panel assembly. (The GPS antennatransceiver is attached to the display panel assembly with

Strona 23

Safety warning noticeWARNING! To reduce the possibility of heat-related injuries or of overheating the device, do notplace the device directly on your

Strona 24 - Speakers

Remove the rear-facing webcam:1. Unsolder the battery cables from the system board in the following sequence:(1) Black battery cable(2) White battery

Strona 25 - Wifi antenna

3. Detach the rear-facing webcam (2) from the display panel assembly. (The rear-facing webcam isattached to the display panel assembly with double-sid

Strona 26

Remove the front-facing webcam:1. Unsolder the battery cables from the system board in the following sequence:(1) Black battery cable(2) White battery

Strona 27 - GPS antenna

3. Detach the front-facing webcam (2) from the display panel assembly. (The front-facing webcam isattached to the display panel assembly with double-s

Strona 28

MicrophoneDescription Spare part numberMicrophone (includes cable and double-sided adhesive) 756038-001Before removing the microphone, follow these st

Strona 29 - Rear-facing webcam

3. Detach the microphone (2) from the display panel assembly. (The microphone is attached tothe display panel assembly with double-sided adhesive.)4.

Strona 30

Remove the display panel cable:1. Unsolder the battery cables from the system board in the following sequence:(1) Black battery cable(2) White battery

Strona 31 - Front-facing webcam

4. Remove the display panel cable (3).NOTE: Steps 4 and 5 apply to HP 10 2101 Tablet models. See steps 2 and 3 for display panelcable removal instruct

Strona 32

System boardDescription Spare part numberSystem board equipped 16-GB eMMC system storageEquipped with an Allwinner A31 ARM Cortex-A7 quad core 1.0-GHz

Strona 33

Remove the system board:1. Unsolder the battery cables from the system board in the following sequence:(1) Black battery cable(2) White battery cable(

Strona 34 - Microphone

iv Safety warning notice

Strona 35 - Display panel cable

6. Unsolder the Wifi antenna cable (5) from the contact point on the system board.7. Unsolder the left speaker cables (1) from the contact points on t

Strona 36

12. Remove the I/O bracket (2).The I/O bracket is available using spare part number 784324-001.13. Remove the system board (3).Reverse this procedure

Strona 37

6 Power cord set requirementsThe wide-range input feature of the tablet permits it to operate from any line voltage from 100 to 120volts AC, or from 2

Strona 38 - System board

Country/region Accredited agency Applicable note numberGermany VDE 1Italy IMQ 1Japan METI 3The Netherlands KEMA 1Norway NEMKO 1The People's Repub

Strona 39

7RecyclingWhen a non-rechargeable or rechargeable battery has reached the end of its useful life, do not disposeof the battery in general household wa

Strona 40

IndexAAC adapter, spare part numbers7, 8antennaremoval 19, 21spare part number 5, 8, 19,21Antenna Kit, spare part number5, 8, 19, 21audio, product des

Strona 41

ports 2power requirements 2processors 1product name 1sensors 2serviceability 2storage 1video 1wireless 2product name 1Rrear-facing webcamremoval 23spa

Strona 42 - 6 Power cord set requirements

Table of contents1 Product description ... 12

Strona 43

Display panel cable ... 29System board ...

Strona 44 - 7Recycling

1 Product descriptionCategory Description HP 10 Plus 2201TabletHP 10 2101TabletProduct Name HP 10 Plus 2201 Tablet × HP 10 2101 Tablet ×Chipset/p

Strona 45

Category Description HP 10 Plus 2201TabletHP 10 2101TabletSensors●Accelerometer●G-sensor●GPS××Wireless WLAN: 802.11 b/g/n, Miracast-compatible × ×Port

Strona 46

2 External component identificationItem Component Item Component(1) Power button (6) Micro USB port(2) Volume control buttons (7) Micro HDMI port(3) M

Komentarze do niniejszej Instrukcji

Brak uwag