Hp Insight Control Instrukcja Użytkownika Strona 53
- Strona / 82
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
1. Verify that the primary controller is supported for Insight Control server migration. For a
complete list of supported controllers, see HP Insight Management Support Matrix at the
following website:
http://www.hp.com/go/insightmanagement/docs
2. Verify that the latest firmware is installed on the storage controller.
3. If the Insight Control server migration Boot CD ISO cannot detect the storage controller, you
might need to reconfigure the storage controller environment variable.
a. Reboot the destination server to Rom-Based Setup Utility (RBSU) by pressing the F9 key
during POST.
b. Select the Boot Controller Order option and verify the proper boot order for the storage
controllers.
c. Press Esc to exit RBSU, and then press F10 to confirm the exit and to save your changes.
d. Reboot the destination server by using the Insight Control server migration Boot CD ISO.
When the destination server boots, the Insight Control server migration Boot CD ISO will
detect the storage controller.
Destination server displays a blank screen when it boots to server migration Boot CD
ISO
The destination server might display a blank screen when it boots to the server migration Boot CD
ISO if the server has more than 64 GB of RAM.
Suggested action
Try the following:
1. At the boot menu, press Esc to enter text mode.
2. At the text mode boot prompt, type sos mem=4G.
3. Press Enter.
Some storage volumes on the destination server are not available for selection
Some storage volumes configured on the destination server might not be available for selection in
step 5 (Specify Destination Disks and Resize NTFS Partitions) of the migration
wizard.
Suggested action
If expected volumes do not appear, try one of the following:
• Verify that Insight Control server migration supports the storage controller. Volumes configured
on an unsupported storage controller cannot be selected for migration. For more information
about supported controllers, see HP Insight Management Support Matrix at http://
www.hp.com/go/insightmanagement/docs.
• Run the Array Configuration Utility (if your storage controller is supported), and verify the
status of the volumes on the Smart Array controller to be sure that the volumes are not in a
failed state. Also, verify that all volumes on the controller are numbered sequentially beginning
with Logical Drive 1, as required by the Insight Control server migration. If volumes are not
numbered sequentially, clear the configuration and re-create the necessary volumes.
Static IP address cannot be assigned on the destination server while booting using
the Boot CD ISO
Assigning a static IP address on the destination server might result in an error similar to the following:
The IP address xxx.xxx.xxx.xxx you have entered for this network adapter
is already assigned to another adapter.
Destination preparation 53
- Abstract 1
- Contents 3
- 4 Contents 4
- Contents 5 5
- 6 Contents 6
- Contents 7 7
- 8 Contents 8
- Contents 9 9
- Part I Overview and concepts 10
- Overview 11
- Related products 11
- 2 Server migration concepts 13
- 14 Server migration concepts 14
- Part II Premigration tasks 16
- 4 Planning the migration 18
- Resizing Linux file systems 19
- Migration security 20
- Disabling antivirus software 21
- Part III Migration 22
- Removing guest tools 24
- Source Agent 28
- Prerequisites 29
- 8 Migrating the servers 34
- Prerequisites 35 35
- 36 Migrating the servers 36
- SAN migrations in Windows 37
- Starting the migration wizard 38
- 40 Migrating the servers 40
- 9 Postmigration tasks 42
- Viewing migration logs 44
- Validating the migration 44
- Validating the migration 45 45
- 10 Troubleshooting 47
- Source preparation 48
- Suggested action 49
- 2003 Application Station 50
- Destination preparation 51
- 52 Troubleshooting 52
- 54 Troubleshooting 54
- Migration process 56
- 60 Troubleshooting 60
- Postmigration 62
- How to contact HP 70
- HP authorized resellers 71
- Documentation feedback 71
- Related information 71
- Typographic conventions 72
- Typographic conventions 73 73
- Performing the migration 76
- Glossary 78
- 80 Index 80
- 82 Index 82
Powiązane produkty i podręczniki dla Narzędzia Hp Insight Control
Narzędzia Hp Insight Control Instrukcja Użytkownika
(173 strony)
(173 strony)
Narzędzia Hp OneView Instrukcja Użytkownika
(307 strony)
(307 strony)
Hoshizaki DCM-500BWH-OS manuels
Manuels d'utilisation et guides de l'utilisateur pour Congélateurs Hoshizaki DCM-500BWH-OS.
Nous fournissons des manuels en pdf 1 Hoshizaki DCM-500BWH-OS à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji