HP 220mx Instrukcja Użytkownika Pobierz pdf (Strona 57)

Chapter 3 3-17

Operating the Jukebox

Setting the SCSI IDs

Operating the

Jukebox

Changing the Current SCSI IDs

READY > ADMIN * > SCSI ID’S * > SET ID’S *

NOTE If you are unfamiliar with basic SCSI addressing or LUN addressing, refer to

Appendix B.

Start with READY in the display.

1. Press

NEXT until ADMIN * displays, and then press ENTER.

2. Enter the administration password.

Instructions for entering this password are in “Entering the Administration

Menu Password” previously in this chapter.

3. Press

NEXT until SCSI ID’S displays, and then press ENTER.

4. VIEW ID’S displays. Press

NEXT until SET ID’S displays and then press

ENTER.

BUS 1 * displays. If you want to change the IDs on Bus 1, press

ENTER.

If you want to change the IDs on Bus 2, press

NEXT until BUS 2 * displays and

then press

ENTER.

If you are using basic SCSI addressing (LUN mode OFF):

JKBX ID # LUN # or DRV # ID # LUN # displays. (JKBX ID #

stands for the current ID of the jukebox controller, LUN # is the current logical

unit number, and DRV # ID # is the current ID setting for the displayed drive

number.) When using basic SCSI addressing, the LUN # is always 0.

If you are using LUN addressing (LUN mode ON):

JKBX BUS 1 # or DRVs BUS 1 # displays on Bus 1, or DRVs BUS 2 #

displays on Bus 2. (“#” is the current ID for the jukebox controller and drives

when LUN mode is ON.)

5. Press

NEXT until the setting you wish to change displays, and then press ENTER.

The # (current ID) begins flashing.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 119 120

Brak uwag

HP 220mx Instrukcja Użytkownika Strona 57