HP EliteDesk 800 G2 Small Form Factor PC Instrukcja Użytkownika Pobierz pdf (Strona 31)

Removing and replacing a primary 3.5-inch hard drive

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that

you can transfer the data to the new hard drive.

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB flash drives, from the computer.

3. Turn off the computer properly through the operating system, then turn off any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as

the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to

the internal components of the computer.

5. If the computer is on a stand, remove the computer from the stand.

6. Remove the computer access panel.

7. Disconnect the power cable (1) and data cable (2) from the back of the hard drive.

Installing and removing drives 25

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 57 58

Brak uwag

HP EliteDesk 800 G2 Small Form Factor PC Instrukcja Użytkownika Strona 31