HP SmartCard NIPRNet Solution for US Government Instrukcja Użytkownika Pobierz pdf (Strona 10)

Verify the network settings

Use the following information to verify the HP printer’s TCP/IP network information.

1. Open the EWS.

For instructions, see Access the Embedded Web Server (EWS) on page 4

2. On the top navigation tabs, select the Networking tab.

3. On the left navigation pane, select the TCP/IP Settings, and then select the Network Identication tab.

Figure 3-2 TCP/IP Settings

4. Verify that the Host Name and Domain Name (IPv4/IPv6) are properly set.

5. Verify that the DNS Primary and DNS Secondary are correctly set.

6. If required, type additional DNS suxes in the DNS Suxes text box of the TCP/IP Domain Sux

section.

7. If applicable, type the WINS Primary and Secondary addresses in the WINS (IPv4 only) section.

8. Click Apply to save the changes.

6 Chapter 3 Congure the printer settings using the Embedded Web Server ENWW

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Brak uwag

HP SmartCard NIPRNet Solution for US Government Instrukcja Użytkownika Strona 10