Hp ProLiant BL465c G6 Server-Blade Instrukcja Użytkownika Pobierz pdf (Strona 22)

Hardware options installation 22

CAUTION: To avoid damage to the processor:

• Handle the processor only by the edges.

• Do not touch the bottom of the processor, especially the contact area.

CAUTION: To prevent possible server blade malfunction, do not mix processors of different

speeds or cache sizes. Refer to the label on the processor heatsink for a description of the

processor.

CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the

heatsink is removed from the processor after it has been installed.

CAUTION: To prevent possible server blade overheating, always populate each processor

socket with a processor socket cover and a heatsink blank or a processor and a heatsink.

IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty, the

server blade does not power up.

To install a processor:

1. Power down the server blade (on page 12).

2. Remove the server blade (on page 13).

3. Remove the access panel (on page 14).

4. Remove the heatsink blank. Retain the heatsink blank for future use.

CAUTION: The pins on the processor socket are very fragile. Any damage to them may

require replacing the system board.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 92 93

Brak uwag

Hp ProLiant BL465c G6 Server-Blade Instrukcja Użytkownika Strona 22