Hp ProLiant BL490c G6 Server-Blade Instrukcja Użytkownika Pobierz pdf (Strona 21)

Hardware options installation 21

For hard drive connector locations, see "System board components (on page 7)."

6. Connect and route the cables.

7. Install the access panel (on page 13).

8. Install the server blade ("Installing a server blade" on page 17).

Memory options

IMPORTANT: This server blade does not support mixing RDIMMs and UDIMMs. Attempting to

mix these two types causes the server to halt during BIOS initialization.

The memory subsystem in this server blade can support RDIMMs or UDIMMs. Both types are referred to as

DIMMs when the information applies to both types. When specified as RDIMM or UDIMM, the information

applies to that type only. All memory installed in the server blade must be the same type.

The server blade supports the following DIMM speeds:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Brak uwag

Hp ProLiant BL490c G6 Server-Blade Instrukcja Użytkownika Strona 21