Hp ProLiant DL380 G6 Server Instrukcja Użytkownika Strona 47
- Strona / 117
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Hardware options installation 47
Lockstep Memory population guidelines
For Lockstep memory mode configurations, observe the following guidelines:
• Observe the general DIMM slot population guidelines (on page 45).
• Always install DIMMs in channels 1 and 2 for each installed processor.
• Do not install DIMMs in channel 3 for any processor.
• DIMM configuration on channel 1 and channel 2 of a processor must be identical.
• In multi-processor configurations, each processor must have a valid Lockstep Memory configuration.
• In multi-processor configurations, each processor may have a different valid Lockstep Memory
configuration.
Single-processor Lockstep population order
For Lockstep memory mode configurations with a single processor, populate the DIMM slots in the following
order:
• RDIMM
o First: A and B
o Next: D and E
o Last: G and H
o Do not populate slots C, F, or I.
• UDIMM
o First: A and B
o Last: D and E
o Do not populate slots C, F, G, H, or I.
After installing the DIMMs, use RBSU to configure the system for Lockstep memory support ("Configuring
lockstep memory" on page 68).
Multi-processor Lockstep population order
For Lockstep memory mode configurations with multiple processors, populate the DIMM slots for each
processor in the following order:
• RDIMM
o First: A and B
o Next: D and E
o Last: G and H
o Do not populate slots C, F, or I.
• UDIMM
o First: A and B
o Last: D and E
o Do not populate slots C, F, G, H, or I.
After installing the DIMMs, use RBSU to configure the system for Lockstep memory support ("Configuring
lockstep memory" on page 68).
- HP ProLiant DL380 G6 Server 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Front panel LEDs and buttons 8
- Systems Insight Display LEDs 9
- Rear panel components 11
- Rear panel LEDs and buttons 12
- System board components 13
- System maintenance switch 14
- NMI functionality 15
- SAS and SATA device numbers 16
- SAS and SATA hard drive LEDs 17
- PCI riser cage LEDs 18
- Battery pack LEDs 19
- Hot-plug fans 20
- Operations 22
- Remove the access panel 23
- Install the access panel 24
- Remove the PCI riser cage 26
- Install the PCI riser cage 26
- Remove the air baffle 27
- Rack planning resources 28
- Optimum environment 29
- Temperature requirements 30
- Power requirements 30
- Rack warnings 31
- Installing hardware options 31
- Setup 33 33
- Registering the server 34
- Introduction 35
- Processor option 35
- Install the heatsink 40
- Memory options 41
- DIMM identification 43
- Memory configurations 43
- Installing a DIMM 48
- Optical drive option 50
- Expansion board options 53
- PCI riser board option 56
- Hard drive cage option 57
- Cabling 63
- BBWC battery cabling 64
- Configuration and utilities 65
- HP ROM-Based Setup Utility 66
- Boot options 67
- BIOS Serial Console 67
- Configuring mirrored memory 67
- Array Configuration Utility 68
- Management tools 69
- ROMPaq utility 70
- Erase Utility 70
- Redundant ROM support 71
- Internal SD support 71
- Diagnostic tools 72
- Keeping the system current 73
- ProLiant Support Packs 74
- Care Pack 74
- Troubleshooting 75
- Symbols on equipment 76
- Warnings and cautions 76
- Symptom information 77
- Loose connections 79
- Service notifications 80
- Server health LEDs 80
- Troubleshooting flowcharts 80
- General diagnosis flowchart 81
- Symptoms: 83
- Troubleshooting 85 85
- POST problems flowchart 86
- OS boot problems flowchart 88
- Troubleshooting 89 89
- • Redundancy failure 90
- (http://www.hp.com/support) 91
- Troubleshooting 92 92
- Battery replacement 93
- FCC rating label 94
- Class A equipment 94
- Class B equipment 94
- Modifications 95
- • EMC Directive 2004/108/EC 96
- BSMI notice 97
- Korean notice 97
- Japanese notice 97
- Chinese notice 98
- Laser compliance 98
- Battery replacement notice 98
- Electrostatic discharge 100
- Specifications 101
- Technical support 104
- Technical support 105 105
- Customer Self Repair 106
- Technical support 107 107
- Reparo feito pelo cliente 108
- Technical support 109 109
- Technical support 110 110
- Technical support 111 111
- Acronyms and abbreviations 112
- Index 115 115
- Index 116 116
- Index 117 117
Powiązane produkty i podręczniki dla Sprzęt komputerowy Hp ProLiant DL380 G6 Server
(87 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.130 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji