Hp ProLiant DL380 G7 Server Instrukcja Użytkownika Pobierz pdf (Strona 64)

Hardware options installation 64

Hard drive cage option

Installation of a SAS expander card or an additional SAS controller option is required to support the hard

drive cage option.

1. Power down the server (on page 24).

2. Extend the server from the rack (on page 24).

3. Remove the access panel (on page 25).

4. Disconnect and remove the optical drive cables ("Optical drive cabling" on page 69), if installed.

5. Using a T-15 Torx screwdriver, remove the two optical drive retaining screws, and then remove the

optical drive cage.

6. Remove the two primary hard drive retaining screws, and then slide the primary hard drive cage

forward.

7. Install the optional hard drive cage.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 126 127

Brak uwag

Hp ProLiant DL380 G7 Server Instrukcja Użytkownika Strona 64