Hp DC7800 Instrukcja Użytkownika Strona 166

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 276
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 165
8. Disconnect the serial port from the system board.
9. Disconnect the balance of the cables from the system board.
10. Remove the heatsink (
Heatsink on page 149).
11. Remove the eight screws that secure the system board to the chassis (1).
12. Lift up the front of the system board (2), and then pull the system board forward, up, and out of the
chassis (3).
To install the system board, reverse the removal procedure.
NOTE: When replacing the system board, you must also change the chassis serial number in the
BIOS.
NOTE: The heatsink should be installed on the system board before the system board is reinstalled
in the chassis.
154 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Przeglądanie stron 165
1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 275 276

Komentarze do niniejszej Instrukcji

Brak uwag