Hp PC Instrukcja Użytkownika Pobierz pdf (Strona 44)

38 Getting Started Guide

Using the Audio Wizard in the Sound Effect Manager

The Sound Effect Manager Audio Wizard can help you connect front-panel audio.

To use the Audio Wizard:

1 Turn on the PC.

2 Click Start on the taskbar.

3 Choose Control Panel.

4 Click Sounds, then Speech and Audio Devices (or Sounds and Audio

Devices).

5 Click Sound Effect Manager. The window opens.

6 Click Audio Wizard. A window opens that shows the connector panel on the

front of the PC.

7 Place a check in the Enable jack detection check box to enable the wizard.

8 Connect the speaker system audio cable plugs into the connectors on the front

of your PC. The panel display highlights a cable that is properly inserted in a

connector.

9 Close the window.

Retasking front-panel connectors with Sound Effect

Manager

With the Audio Wizard enabled, both the microphone connector and the

headphones connector on the front of the PC can be retasked to perform a different

audio function. These two connectors are universal audio jacks. When you plug in a

cable, the wizard asks you to select the function for the cable from a list, and then it

sets the universal audio jack to perform as the selected function. The functions are:

• Stereo Speaker (Out)

• Microphone (In)

• Headphone (In)

• Audio Line In

To retask front-panel connectors:

1 Follow steps 1 through 7 of the procedure, “Using the Audio Wizard in the

Sound Effect Manager” on page 38.

2 When you plug in a cable, the wizard asks you to select the device you

plugged in from a list.

3 Close the window.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 119 120

Brak uwag

Hp PC Instrukcja Użytkownika Strona 44