Hp HDX 16 Instrukcja Użytkownika Strona 92

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 146
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 91
Removal and replacement procedures 4–57
Remove the subwoofer:
1. Remove the subwoofer cable 1 from the clips 2 and routing channel built into the base enclosure.
2. Remove the two Phillips PM2.5×5.0 broadhead screws 3 that secure the subwoofer to the base enclosure.
The rubber grommets 4 should be inspected and replaced in the correct locations on the subwoofer. These
grommets are critical for satisfactory subwoofer performance.
3. Remove the subwoofer 5 by lifting it straight up.
Reverse this procedure to install the subwoofer.
Przeglądanie stron 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 145 146

Komentarze do niniejszej Instrukcji

Brak uwag