Hp LC 2000 Instrukcja Użytkownika Pobierz pdf (Strona 39)

Chapter 3 Opening and Closing the HP NetServer

12. To replace the left side cover, position the cover’s tabs next to the

respective holes along the outer edge on the side of the chassis.

13. Slide the cover toward the rear.

14. Tighten the thumbscrew at the front of the cover.

15. To replace the right side cover, position the cover’s tabs next to the

respective holes along the outer edge on each side of the chassis.

16. Slide the cover toward the rear.

17. Tighten the thumbscrew at the front of the chassis.

18. To replace the bezel, insert the tabs at the bottom of the bezel into the slots

on the chassis.

19. Swing the top of the bezel toward the chassis until it snaps into place. See

Figure 3-8.

Figure 3-8. Replacing the Bezel

20. Return the HP NetServer to normal operation.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 193 194

Brak uwag

Hp LC 2000 Instrukcja Użytkownika Strona 39