Hp PAVILION DV3 Instrukcja Użytkownika Pobierz pdf (Strona 51)

Display assembly

Description Spare part number

13.3-inch, WXGA BrightView display assembly (includes camera/microphone module, camera/

microphone module cable, 2 microphones, and 3 wireless antenna transceivers and cables)

506155-001

Before removing the display assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 32).

5. Disconnect the wireless antenna cables from the WLAN module (see

WLAN module on page 33).

6. Remove the keyboard and switch cover (see

Keyboard and switch cover on page 40).

Remove the display assembly:

1. Close the computer.

2. Turn the computer upside down.

3. Pull the WLAN antenna cables (1) down through the channel (2) located between the base

enclosure (3) and the top cover on the opposite side.

4. Turn the computer right-side up.

5. Open the computer as far as possible.

6. Remove the WLAN antenna cables (1) from the clips and routing channel built into the top cover.

Component replacement procedures 43

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 113 114

Brak uwag

Hp PAVILION DV3 Instrukcja Użytkownika Strona 51