Hp PAVILION DV3 Instrukcja Użytkownika Strona 61

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 114
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 60
3. Remove the three Phillips PM2.5×4.0 screws (3) that secure the system board to the base
enclosure.
4. Use the optical drive connector (1) to lift the left edge of the system board (2) until it rests at an
angle.
5. Remove the system board (3) from the base enclosure by sliding it up and to the left at an angle.
Reverse the preceding procedure to install the system board.
Component replacement procedures 53
Przeglądanie stron 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 113 114

Komentarze do niniejszej Instrukcji

Brak uwag