Hp Z210 Convertible Minitower-Workstation Instrukcja Użytkownika Pobierz pdf (Strona 65)

6. Rotate the drive cage to its upright position.

Figure 10-8 Rotating the Drive Cage Up

7. If a cable is not already present and connected, connect the SATA data cable to the system board

connector labeled SATA1.

Route the data cable through the cable guides. Two cable guides keep the data cable from being

pinched by the drive cage when raising or lowering it. One is located on the bottom side of the

drive cage. The other is part of the chassis frame under the drive cage. Ensure that the data cable

is routed through these guides before connecting it to the optical drive.

Figure 10-9 Routing the drive cable

ENWW

Installing an optical drive in an HP Z210 SFF Workstation

1 2 ... 60 61 62 63 64 65 66 67 68

Brak uwag

Hp Z210 Convertible Minitower-Workstation Instrukcja Użytkownika Strona 65