HP SmartStream Print Controller for HP Designjet T3500 Production eMFP Instrukcja Użytkownika Strona 18

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 17
Communication error: The printer cannot communicate with the folder; there are various possible reasons
(door open, folder turned o, communication cable disconnected).
Internal error: The folder is not working correctly; there are various possible reasons (door open, folder
jammed or oine). An error code is displayed on the front panel; check the service documentation for an
explanation of it.
Stacker status
If a printer has a stacker installed, its status may be described in the following ways. However, the status values
depend on the stacker you are using: for more details, check the documentation provided with the stacker.
Initializing: The stacker is initializing and start warming up soon.
Warming up: The stacker is warming up and will be ready soon.
Ready: The stacker is ready or stacking.
: The printer is in manual mode: the stacker door is open.
Full: The stacker is full, and you must remove the stacked paper in order to continue printing.
Busy: The stacker is being cleaned, and you must wait for the cleaning procedure to nish.
Upgrading rmware: The stacker rmware is being updated, and you must wait for the updating procedure
to nish.
Jam: The stacker is jammed, and you must clear the jam in order to continue printing.
Open: The stacker door is open, and you must close it in order to continue printing.
Detached: The stacker is detached from the printer, and you must attach it in order to continue printing.
Disabled: The stacker is disabled, and printing will continue without using the stacker.
Communication error: The printer cannot communicate with the stacker; the stacker may be turned o or
disconnected from the printer.
Internal error: The stacker is not working correctly for some unknown reason. An error code is displayed on
the front panel; follow the instructions there.
12 Chapter 2 Printers ENWW
Przeglądanie stron 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 82 83

Komentarze do niniejszej Instrukcji

Brak uwag