HP Web Jetadmin Software Instrukcja Użytkownika Pobierz pdf (Strona 13)

Device

Alternative Letterhead Mode

This option defines the first side of the duplex page as having letterhead and the other side having no letterhead.

Asset Number

The Asset Number identifies the device based on the accounting system for your organization.

Auto Cleaning Page

This option enables and disables the automatic cleaning page. You can specify how often you want to print the automatic cleaning page.

Auto Continue

When the device displays a non-critical error message, this option allows the device to resume operation after ten seconds. Select Off to require the user

to acknowledge non-critical error messages by pressing Continue on the device before it resumes operation.

Auto Recovery

Use this option to enable or disable the Auto Recovery feature on the device. If this option is enabled and an unrecoverable error occurs in the device

firmware, the device automatically turns off and turns back on to recover from the error.

Auto Sense Mode

Use this option to optimize device settings for certain media types that can be detected automatically by the printer. Sensing options may include: ● Full

Sensing: For each sheet of paper that is picked up from the tray, the product detects light paper, plain paper, heavy paper, glossy paper, tough paper,

and transparencies. ● Expanded Sensing: For the first few sheets of paper that is picked up from the tray, the product detects light paper, plain paper,

heavy paper, glossy paper, tough paper, and transparencies. The product assumes the rest of the pages are of the same type. ● Transparency Only:

The product distinguishes between transparencies and non-transparencies.

AutoSend

This option enables your product to periodically send configuration and supplies usage information to a recipient list. If you have a relationship with HP

that provides you services such as proactive cartridge replacement, pay per page contracts, support agreements, or usage tracking, enable the Send to

HP feature.

AutoStore

AutoStore is an automated document and content capture solution for HP MFP devices. The AutoStore product consists of a server-based application,

AutoStore Server, and an installable embedded Web server application, AutoStore ChaiService. The AutoStore ChaiService contacts the AutoStore

Server on a regular basis to determine whether there is a new set of AutoStore menus to download and display on the front panel of a device. To do this,

it must be configured with the AutoStore Server information. You can also configure how frequently the AutoStore ChaiService will contact the AutoStore

Server.

Browser

Use this option to configure specific settings for the web browser on the device (for example, enabling OXPd 1.6 support). The web browser settings that

can be configured include connection timeout, response timeout, and a list of trusted sites.

Calibration Timing

Use this option to control when calibrations are performed. You can set the timer (in hours) to turn on or off calibration.

Cartridge Low Action

This option lets you specify how the printer responds when a toner-low condition exists. Set the printer to continue normal operations or set it to stop

printing.

Cartridge Out Action

This option lets you specify how the printer responds when a toner-out condition exists. Set the printer to continue normal operations or set it to stop

printing.

Clearable Warnings

This option lets you determine whether a warning is cleared on the control panel or when another job is sent.

Cold Reset Media Size

This option returns or sets the media size that is used as the Default Media Size when a cold reset occurs. Different countries/regions require different

default media sizes. The factory uses this option to select the default media size.

Color Supply Out

This option lets you specify how the device responds when one of the color toner cartridges is empty. You can choose to set the device to continue

printing with black toner (for a certain number of pages) or set it to stop printing altogether.

Color/Black Mix

This option optimizes the performance or cost per page depending on the expected color content of typical print jobs. This feature allows you to set

device behavior for printing mostly color or mostly black (monochrome) print jobs.

Company Name

The Company Name is the name of the organization that owns or is responsible for the device.

Contact Person

Use this option to specify the name of the person who should be contacted if there are any problems with the device or if you need support.

Control Panel Display

This option lets you make specific items appear on the control panel display of the device. The items include IP Address, Hostname, Serial Number,

Asset Number, Device Name, System Location, System Contact, Device Location, and a short text string that the user can define.

Control Panel Language

This option lets you specify the language that is displayed on the device control panel.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 89 90

Komentarze do niniejszej Instrukcji

Brak uwag

HP Web Jetadmin Software Instrukcja Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Drukarki laserowe / LED HP Web Jetadmin Software