HP Web Jetadmin Software Instrukcja Użytkownika Pobierz pdf (Strona 21)

Color Copy Mode

Use this option to set the device to the desired copy mode.

Color Copy Mode With Auto

Use this option to set the device to the desired copy mode.

Color Copy Option

The Color Copy Option lets you disable color copying and control the cost of color printing.

Copier Fit To Page

This option enables the device with local copier capability to fit the input image size automatically onto the output sheet size. This object allows you to

scale to the output size without knowing the scaling percentage.

Copier Reduce/Enlarge

This option lets you to specify reduction or enlargement for copies as a percentage of the original. A value of 100 makes copies with no reduction or

enlargement; higher values make enlargements, while lower values cause a reduction. Reductions or enlargements are useful when the paper size of the

copy is different from the size of the source document. Some useful values for copying from one size to another would be: Legal to letter (78% Letter to

A4 (97%) A4 to letter (103% Legal to A4 (83%)

Copy - Alternative

Letterhead Mode

When printing using duplex mode, this option defines the first side of the page as having letterhead and the other side having no letterhead.

Copy Background Cleanup

Use this option to set the default amount of background to be removed from the original document being scanned. For example, if a higher value is set

then more of the background is removed from the original.

Copy Content Orientation

Use this option to specify the default orientation for the scan job and binding format of the original document and the print job. If the setting is:

● Book-Style: The original document has book-style (long edge) binding and the printed document has book-style binding.

● Book-style original; Flip-style Copy: The original document has book-style (long-edge) binding and the printed document has flip-style binding.

● Flip-style: The original document has flip-style (short edge) binding and the printed document has flip-style binding.

● Flip-style original; Book-style Copy: The original document has flip-style binding and the printed document has book-style binding.

Copy Contrast (was Default

Original Density)

Use this option to specify the default contrast (brightness) that the device uses to make copies. The device can make copies that are lighter or darker

than the original. To take advantage of the one-touch copying feature, change the default contrast to the value that users typically select when making

copies.

Copy Darkness

Use this option to specify the default amount of exposure that is applied to the scanned document. For example, a lower setting will cause the printed

output to be lightened; a higher setting will cause the printed output to be darkened.

Copy Fold

Use this feature to fold sheets of paper in half or into thirds. Folding is supported only for Letter-sized and A4-sized paper.

Copy Heavy Originals

Use this option to specify the weight of the original scanned documents. When heavy paper is used, the device adjusts the tension and moves the paper

through the scanning area at a slower rate. For paper that weighs more than 100 g/m2, the quality of the output might improve if you select the Heavy

option. To specify the weight of the original scanned documents, select the Normal or Heavy option.

Copy Job Auto Interrupt

This option allows the device to interrupt an active network print job to print a new copy job initiated at the device control panel. With this feature enabled,

users do not have to wait for large, multi-copy network print jobs to finish printing before they can print a new copy job.

Copy Job Build

Use this option to enable by default combining multiple scanned jobs into a single printed document. If this option is enabled, then multiple scan jobs will

be combined into one print job and no other network print jobs will interrupt the copy. If it is disabled, the scan jobs will remain separate scan jobs.

Copy Job Scan Ahead

When this option is enabled, a user can walk up to the device and initiate a copy job while the device is printing a network print job. The device scans

and holds the copy job, but first finishes printing the network print job before printing the copy job. When this option is disabled and a user initiates a copy

job while the device is printing a network print job, the device waits until it finishes printing the network print job to start scanning the copy job. The device

displays a message on the control panel saying that the copy job is blocked and will be processed as soon as the current job finishes printing. The user

can choose to cancel the copy job or leave the originals in the automatic document feeder (ADF) or on the scanner glass.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 89 90

Komentarze do niniejszej Instrukcji

Brak uwag

HP Web Jetadmin Software Instrukcja Użytkownika Strona 21

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Drukarki laserowe / LED HP Web Jetadmin Software