HP Elite 8300 Series Small Form Factor Dokumentacja Strona 113

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 349
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 112
Front I/O, USB Assembly
Description Spare part number
Front I/O and USB assembly 646821-001
The front I/O, USB assembly is mounted to the front of the chassis and is removed by pulling it away
from the chassis.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 72).
2. Remove the computer access panel (
Access Panel on page 73).
3. Remove the front bezel (
Front Bezel on page 74).
4. Disconnect the three cables from the following system board connectors:
Yellow connector labeled FRONT USB
Green connector labeled FRONT USB2
Blue connector labeled FRONT AUD
NOTE: The blue FRONT AUD connector is not located near the other two connectors
used for the front I/O assembly. See the following image for its location.
102 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Przeglądanie stron 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 348 349

Komentarze do niniejszej Instrukcji

Brak uwag