HP Elite 8300 Series Small Form Factor Dokumentacja Strona 158

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 349
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 157
Power Switch/LED Assembly
Description Spare part number
Power switch/LED assembly 646828-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 72).
2. Remove the access panel (
Computer Access Panel on page 120).
3. Remove the front bezel (
Front Bezel on page 121).
4. Remove the front fan (
Front Fan Assembly on page 144).
5. Disconnect the cable from the system board connector labeled PB/LED.
6. With the computer on its side, press on the tabs on the bottom of the assembly (1) to disengage
the assembly from the chassis, and then rotate the bottom of the assembly upward (2) to
remove it from the chassis.
Figure 7-29 Removing the power switch/LED
7. Pull the assembly away from the chassis while threading the cable through the hole in front of
the chassis.
Power Switch/LED Assembly 147
Przeglądanie stron 157
1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 348 349

Komentarze do niniejszej Instrukcji

Brak uwag