HP StorageWorks Edge Switch 2/16 Instrukcja Użytkownika Pobierz pdf (Strona 62)

2–12 edge switch 2/16 product manager user guide

Monitoring and Managing the Switch

— Faulty or dirty cable connection.

— Faulty host bus adapters that do not send out FLOGI within reasonable time

frame.

Segmented E_Port Messages:

• Incompatible operating parameters, such as resource allocation time-out values

(R_A_TOV) or error-detect time-out values (E_D_TOV) are inconsistent. Refer

to Configure Operating Parameters on page 3-4 for more information.

• Duplicate domain IDs. Refer to Configure Operating Parameters on page 3-4 for

more information.

• Incompatible zoning configurations. Refer to sections on joining zoned fabrics in

the hp StorageWorks edge switch 2/16 service manual

(A7284-96002/AA-RS2JA-TE) and the hp StorageWorks ha-fabric manager user

guide (A6534-96024/AA-RS2CA-TE) for details.

• Build fabric protocol error.

• No principal switch (no switch in fabric is capable of being principal switch).

• No response from an attached switch.

Inactive Messages:

Optics speed conflict. An inactive state will occur if you set the port’s data speed to 2

Gb/sec for a 2 Gb/sec port module, and then replace the port module with a 1 Gb/sec

module. To activate the port in this case, replace the module with a module that

supports 2 Gb/sec data speed.

Displaying Switch Information

Double-click the switch illustration, away from a hardware component, to display the

Switch Properties dialog box as shown in the following figure.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 193 194

Brak uwag

HP StorageWorks Edge Switch 2/16 Instrukcja Użytkownika Strona 62