HP AB232A Przewodnik Instalacji Pobierz pdf (Strona 28)

Installing and Configuring Device Drivers

28 FCA2384 PCI-X Host Bus Adapter for OpenVMS and Tru64 UNIX Installation Guide

Using the wwidmgr -show adapter Command

Use the wwidmgr -show adapter command to view HBA configuration.

The following example shows a display from wwidmgr -show adapter for a

system with two HBAs:

The following table describes the elements of the following display line in detail:

[0]kgpsaa0.0.0.4.6 1000-0000-c921-05ab fabric fabric

Item Description Explanation

[0] Item Number A parameter to the –item qualifier in

the -set adapter command. You can

select which HBA to configure by its

item number. An item number of

9999 selects all HBAs.

kgpsaa0.0.0.4.6 Adapter

Mnemonic

Error messages and displays use this

identifier.

1000-0000-c921-05ab The HBA’s WWN This value identifies the HBA to other

nodes on the fibre channel link.

fabric Current Topology The HBA’s operating mode for the

current session; either fabric or loop.

This mode is not affected during a

wwidmgr session.

fabric Next Topology The topology setting for the HBA’s

NVRAM. Unavail indicates that the

NVRAM is not formatted. Fabric or

loop indicates the HBA’s

configuration the next time the

system is initialized.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Brak uwag

HP AB232A Przewodnik Instalacji Strona 28